Monel 400® - Neelcon Steel can supply Monel 400® sheet & Monel 400® plate in any size or quantity you need. Request a quote or contact us for Monel 400® sheet/plate.
Monel 400® is a binary alloy of nickel and copper (with trace amounts of iron, manganese, carbon, and silicon). This alloy exhibits high strength, high resistance to acidic and alkaline environments, and good ductility and thermal conductivity. Monel 400® is suitable for use in temps from subzero to 1,000°F (538°C). It can be hardened only by cold-working.
Monel 400® contains the same nickel and copper content as the naturally-occurring nickel ore found in Ontario, Canada’s Sudbury mines. This makes it a “puritan alloy,” unique among the Monel® alloy family.
Monel 400® sheet and Monel 400® plate both meet the requirements for a range of industrial, international, MIL-SPEC, and other specifications. These include:
STOCKED SIZES | ||
---|---|---|
SIZE | ALLOY 400 PLATE/ SHEET | SIZE |
.125" | Monel 400 Plate, Perforated Plate, Sheet | 3.18mm |
.134" | Monel 400 Coil, Plate, Strips | 3.40mm |
.156" | Monel 400 Plate, Perforated Plate, Sheet | 3.96mm |
.187" | Monel 400 Plate, Sheet, Rolling Plate | 4.75mm |
.250" | Monel 400 Plate, Rolling Sheets, Sheet | 6.35mm |
.312" | Monel 400 Plate, Perforated Plate, Sheet | 7.92mm |
.375" | Monel 400 Plate, Rolling Plate, Sheet | 9.53mm |
.500" | Monel 400 Plate, Sheet, Clad Plate | 12.7mm |
.625" | Monel 400 Plate, Flat Shim, Sheet | 15.9mm |
.750" | Monel 400 Plate, Sheet, Strips | 19.1mm |
.875" | Monel 400 Plate, Rolling Sheets, Sheet | 22.2mm |
1" | Monel 400 Plate, Flat Shim, Sheet | 25.4mm |
1.125" | Monel 400 Plate, Sheet, Clad Plate | 28.6mm |
1.250" | Monel 400 Plate, Sheet, Strips | 31.8mm |
1.500" | Monel 400 Plate, Rolling Plate, Sheet | 38.1mm |
1.750" | Monel 400 Plate, Sheet, Clad Plate | 44.5mm |
2" | Monel 400 Plate, Clad Plate, Sheet | 50.8mm |
2.500" | Monel 400 Plate, Flat Shim, Sheet | 63.5mm |
3" | Monel 400 Plate, Rolling Sheets, Sheet | 76.2mm |
Neelcon Steel offer a wide selection of Monel 400 Plate, Monel 400 Sheet, Suppliers, Monel 400 Coil,Monel 400 Shims,Monel 400 Coil,Monel 400 Clad Plate,Monel 400 Strips,Monel 400 Flat Sheet,Monel 400 Polished Plate,Alloy 400 Plate Stockist Mumbai (Maharashtra) India. Neelcon Steel Wholesale Various High Quality Monel 400 Alloy Plate in all shapes and sizes and with any specifications that the clients, More then 1500 Clients in India, United States, Canada, United Kingdom, United Arab Emirates, Iran, Singapore, Saudi Arabia, South Korea, Indonesia, Malaysia, Italy, Thailand, Germany, Australia, Mexico, Taiwan, Turkey, Pakistan, Spain, France, Brazil, Vietnam, Netherlands, Japan, Philippines, Kuwait, Poland, Qatar, Oman, Egypt, Colombia, Argentina, Nigeria, Finland, Ireland, South Africa, Russia, Bangladesh, Israel, Hong Kong.
Neelcon Steel offers premium Monel® 400 Series products including foil, sheet, plate and bar in rolls slit to your specifications and cut to length in sheets.
Specifications:
STANDARD | UNS | WERKSTOFF NR. | EN | BS | GOST | JIS | AFNOR |
---|---|---|---|---|---|---|---|
Monel 400 | N04400 | 2.4360 | NiCu30Fe | NA 13 | МНЖМц 28-2,5-1,5 | NW 4400 | NU-30M |
Monel K500 | N05500 | 2.4375 | - | - | - | - | - |
MONEL nickel alloy is a solid solution alloy that can be hardened by the process of cold working.
MONEL is a trademark of Special Metals Corporation under which a series of nickel-copper alloys are grouped. Commercially there are many types of MONEL available, such as alloy 400, alloy 401, alloy R-405, Alloy K-500 and Monel 404.
The Monel 400 alloy is also known as super alloy monel. This alloy is available in some standard shapes such as hexagon, round, tube, pipe, plate, strip, sheet and wire.
The proportions of copper and nickel used to make monel are the same as that found in the nickel ore found in Ontario mines. This alloy exhibits good corrosion resistance. This datasheet will look into the chemical composition, properties and applications of MONEL 400 alloy.
The chemical composition of Alloy 400 Plate is given in the following table.
Element | Content (%) |
---|---|
Nickel, Ni | Remainder |
Copper, Cu | 28-34 |
Iron, Fe | 2.5 max |
Manganese, Mn | 2 max |
Silicon, Si | 0.5 max |
Carbon, C | 0.3 max |
Sulphur, S | 0.024 |
Monel 400 Sheet Physical Properties
The following table discusses the physical properties of MONEL 400 alloy.
Properties | Metric | Imperial |
---|---|---|
Density | 8.8 gm/cm3 | 0.318 lb/in3 |
Monel 400 Coil Mechanical Properties
The mechanical properties of MONEL 400 alloy are tabulated below.
Properties | Metric | Imperial |
---|---|---|
Tensile strength(annealed) | 517-620 MPa | 75-90 ksi |
Yield strength | 172-345 MPa | 25-50 ksi |
Modulus of elasticity | 179 GPa | 26000 ksi |
Poisson’s ratio | 0.32 | 0.32 |
The machinability of MONEL 400 is difficult as it work-hardens during machining. The conventional machining techniques used on iron alloys may be used for this alloy.
Welding methods including gas-arc welding, metal-arc welding, gas-metal-arc welding and submerged-arc welding are recommended on this alloy.
Forging of this alloy is to be done by controlled procedures.
Hot working on this alloy needs to be done by choosing proper temperatures. Typical temperatures for hot working range between 648-1176°C (1200-2150°F).
Cold working may be done using soft die materials for better finishing.
MONEL 400 alloy may be annealed at 926°C (1700°F).
The MONEL 400 alloy is used in the following applications:-
© Copyright @ Neelcon Steel All Rights Reserved. | Design & SEO by Mesotek