
Inconel 600 is a solution-hardened grade. The Inconel 600 Round Bar is designed with a superior composition of nickel and chromium. This allows the bars to work well in different corrosive and oxidative media. The presence of nickel in the Alloy 600 Round Bar gives the bar designed in a circular cross-section enhanced resistance and tolerance to cracking induced by acids especially chloride stress-corrosion cracking. The Inconel Round Bar can be used in cryogenic temperatures as well as in applications where the temperatures are as high as 2000 degrees F. ASTM B166 Inconel Bar is a non-pressurized grade that exhibits excellent mechanical properties. These bars showcase good tensile and yield strength in different setups. The versatile grade of ASTM B166 UNS N06600 Bar can be produced via a hot or cold rolling process. Designed with top-notch machinability, the bars can be easily welded in place, making use of standard welding procedures. Alloy 600 Bar has a melting point of 1413 degrees C and is used in applications where there is a requirement for resistance to high temperatures and corrosive media. The Inconel 600 Bar is produced making use of the best raw materials and latest technology by our esteemed workers. These bars are further subjected to screening to eliminate any flaws in them.
The DIN 2.4816 Flat Bar are components that are designed possessing a rectangular cross-sectional area. The bars possess superior strength and are commonly seen in heat exchangers, ladders, and in overhead doors in buildings. The Alloy 600 Hex Bar is a six sided module that is highly versatile. The 6 sides on these bars allow them to be easily moved or rotated within different components. Inconel 600 Rod are devices that can be used to provide support and stability to different applications across stress-induced setup. The AMS 5665 Rod can be custom designed in different shapes and sizes to meet all customer requirements. For any questions and queries about our wide range of products, contact us or visit any of our outlets for more information.
Specifications grade | ASME SB166 / ASTM B166 |
---|---|
Length | 100 upto 3000 millimete |
Standard | ASTM, BS, EN, DIN, AISI, JIS, ASME |
Finishes | BA Finish, Turned, Rough, Polished, Black, NO.4 Finish, Bright, Matt Finish Inconel Round Bar Supplier in India |
Size | 5 upto 500 millimeter |
Tolerance | K11, H11, H8, H9, H13, K12, K9, H10, H12, K10 |
Diameter | 0.1 upto 100 millimeter |
Form OF Inconel 600 Round Bar Suppliers | Square, Billet, Ingot, Rectangle, Round, Forging, Hex |
Products | Width and Length | Price |
---|---|---|
NICKEL ALLOY ROUND BARS GRADE INCONEL 600, UNS N06600 | 1/4 x 24 in | $2.91 / each |
NICKEL ALLOY BAR 20MM DIA INCONEL 600 BAR B166 NO6600 | 1/4 in x 96 in | $6.05 / each |
DRILLED BAR STOCK THERMOWELL-STYLE STRAIGHT,MATERIAL INCONEL 600 OD X ID 22 X 8.5MM INSTRUMENT CONNECTION | 3/8 x 48 in | $5.87 / each |
INCONEL 600 BORED BAR TO ASTM B 517 GR.UNS NO.6600 IN 3 MTRS LENGTH. MADE FROMASTM B 168 PLATES, WITH 100% RT & NDT TE | 1/2 in x 96 in | $17.02 / each |
INCONEL 600, ROUND BAR SIZE OD 6 MM X 6MTR LONG |
5/8 in x 96 in | $32.96 / each |
Size & Dimensions | |||||||
---|---|---|---|---|---|---|---|
Metric | US Bar | ASTM/ Canadian | Japanese | ||||
Bar Size | Diam. (mm) | Diam. (Inch) | Bar Size | Bar Size | Diam. (mm2) | Diam. (mm) | Bar Size |
5 | 5 | 0.250 | #2 | 10M | 100 | 6 | 6 |
5.5 | 5.5 | 0.375 | #3 | 15M | 200 | 10 | 10 |
6 | 6 | 0.500 | #4 | 20M | 300 | 13 | 13 |
7 | 7 | 0.625 | #5 | 25M | 500 | 16 | 16 |
8 | 8 | 0.750 | #6 | 30M | 700 | 19 | 19 |
9 | 9 | 0.875 | #7 | 35M | 1000 | 22 | 22 |
10 | 10 | 1.000 | #8 | 45M | 1500 | 25 | 25 |
11 | 11 | 1.125 | #9 | 55M | 2500 | 29 | 29 |
12 | 12 | 1.250 | #10 | 32 | 32 | ||
14 | 14 | 1.375 | #11 | 35 | 35 | ||
16 | 16 | 1.500 | #12 | 38 | 38 | ||
18 | 18 | 1.625 | #13 | 41 | 41 | ||
20 | 20 | 1.750 | #14 | 44 | 44 | ||
22 | 22 | 1.875 | #15 | 48 | 48 | ||
25 | 25 | 2.000 | #16 | 51 | 51 | ||
28 | 28 | 2.250 | #18 | 57 | 57 | ||
32 | 32 | ||||||
36 | 36 | ||||||
40 | 40 | ||||||
44 | 44 | ||||||
50 | 50 |
Grade | S | C | Fe | Mn | Mo | Si | Ni | Cu | Cr |
---|---|---|---|---|---|---|---|---|---|
Inconel 600 | 0.15 min | 0.15 max | 6.0-10.0 | 1 max | – | 0.50 max | 72 min | 0.50 max | 14.0–17.0 |
Density | Tensile Properties | Melting Point | Elongational | Yield Properties |
---|---|---|---|---|
8.47 g/cm3 | MPa – 655, Psi – 95,000 | 1413 °C (2580 °F) | 40 % | MPa – 310, Psi – 45,000 |
STANDARD | BS | WERKSTOFF NR. | GOST | UNS | AFNOR | JIS | EN |
---|---|---|---|---|---|---|---|
Inconel 600 | NA 13 | 2.4816 | МНЖМц 28-2,5-1,5 | N06600 | NC15FE11M | NCF 600 | NiCr15Fe |
P | Polished | CD | Cold drawn |
SRE | Slit rolled edge | BD | Bright drawn |
HF | Hot finished | CG | Centreless ground |
HRAP | Hot rolled annealed and pickled | CF | Cold finished |
RT | Rough turned/peeled | P&T | Peeled and turned |
PR | Peeled and reeled | ST | Smooth turned |
Inconel Round Bars | Inconel 600 ASTM B166 Hex Bars |
Alloy 600 Round Bars | ASTM B166 Inconel Round Bars |
Inconel 600 Bars | Inconel Square Bars |
Alloy 600 Bars | ASTM B166 N06600 Inconel 600 Flat Bars |
Alloy 600 Rod | Inconel Bar Material |
ASTM B166 UNS N06600 Bars | ASTM B166 600 Inconel Rod |
Alloy 6600 Hot rolled bars | Inconel 600 AMS 5665 Flat Bars |
Alloy 600 Hex Bars | Nickel Alloy 600 Rod |
Alloy 600 Round Bars | ASME SB 166 N06600 Inconel Cold Drawn Bars |
DIN 2.4816 Flat Bars | Alloy 600 ASTM B166 Round Rod |
Alloy 600 Forged Bars | ASME SB166 Inconel 600 Bars |
Nickel Alloy 600 Square Bar | Alloy 600 Hex Bar |
Inconel 600 Flat Bar | ASME SB 166 N06600 Hot Rolled Square Bar |
600 Alloy Square Bar | Inconel 600 Forged Round Bar |
Alloy 600 Rod | ASTM B166 UNS N06600 Hex Bar |
Alloy Flat Bar | Inconel Tig Rod |
UNS N06600 hex bar | DIN 2.4816 Cold Drawn Bars |
Inconel Welding Rod | Alloy Hex Bar |
AMS 5665 Rod | ASME SB166 Inconel 600 Rod |
600 Inconel cold drawn bar | AMS 5665 Bar |
Alloy Rods | Inconel Hollow Bar |
© Copyright @ Neelcon Steel All Rights Reserved. | Design & SEO by Mesotek