
Pipe fittings are adapters or connectors that play a pivotal role in influencing the characteristics of the flow. Inconel 600 Pipe Fittings are nickel-chromium alloy fittings that work well in a range of corrosive and reducing oxidative media. The robust Inconel 600 Fittings have good strength and can work in high temperatures and have good resistance to carburizing elements. The Inconel 625 Pipe Fittings, like the 600 grade are austenitic in nature with good chemical composition. The major difference between the Inconel 625 Fittings and the 600 type is the higher content of chromium embedded in them 625 grade. This gives them enhanced corrosion resistance. Apart from this, the Alloy 625 Fittings are purer than the 600 grade.
The Nickel Alloy 625 Buttweld Fittings are a strong fitting type that is widely seen in use in the piping industry. These fittings change the direction, curtail the flow or join dissimilar piping grades. Similarly, Nickel Alloy 625 Socket weld Fittings are an attachment detail of a pipe, where the pipe is inserted in a recessed area of a pipe fitting. The 2.4856 Tee Fittings are devices having three outlets. These outlets connect three piping components in the system. These tee fitting can be either equal or reduced. In the ASME SB366 No6600 Reducing Tee, one of the branch outlets is smaller than the other two, thereby reducing the flow in that opening. Inconel 600 eccentric/ concentric reducer are two common reducer types that play an important role in joining dissimilar piping equipment. The robust Inconel Pipe Fittings are produced with the best raw materials and latest technology.
The UNS N06625 Elbow is a common pipe fitting that helps in changing the direction of the flow in the piping system. The versatile Alloy 625 45 / 90 Degree Elbow is a high-strength grade and can influence important flow features. They are generally available as ASTM B366 Inconel 625 Short/ Long Radius Elbows. The long and short radii can be distinguished based on their respective radius of curvature with the pipe's nominal diameter. The W. Nr. 2.4816 Long Radius Elbow showcases a radius of curvature that is 1.5 times its nominal diameter and allows the pipe to make a smother turn compared to a short radius elbow. The ASTM B366 UNS N06600 Elbow is seen in use in non-pressurized vessel grades and is produced after vigorous testing procedures to eliminate any flaws in them. The Inconel 600 Pipe Elbow can be custom designed in different sizes and dimensions to meet different product requirements. If you have any queries or want to know more about the Alloy 600 Fittings, contact us for more information.
Inconel Buttweld Fittings Specifications | ASTM B366 / ASME SB366 |
---|---|
Inconel 625 Pipe Elbow Dimensions | ASME/ANSI B16.9, ASME B16.28, MSS-SP-43 |
Inconel 625 Butt weld Pipe Fittings Size | Seamless Butt Weld Fittings: 1/2" - 10", Welded Butt Weld Fittings: 1/2" - 48" |
Inconel UNS N06600 Buttweld Pipe Fittings Type | Seamless / Welded / Fabricated |
Inconel 601 Elbow Schedule | Sch 5 TO Sch XXS. |
718 Alloy Buttweld Fitting Thickness | 20 Swg., 18 Swg., 16 Swg., 14 Swg., 12 Swg., 10 Swg., & Sch. 10, Sch. 40, Sch. 80 etc. |
Inconel 600 Butt weld Pipe Fittings Grades | Inconel 600, 601, 625, 718, 783, 690, x750 Pipe Fittings |
Products | Fitting Pipe Size | Price |
---|---|---|
INCONEL 625 PIPE ,FITTINGS & FLANGES-1/2 WELD NECK FLANGE 2500# RTJ SCH 80S - ASME B16.5, ASTM B564 UNS N06625 | 3/4 in x 3/4 in | $52.17 |
PIPE FITTINGS - 2 x 1.5 REDUCER - ECCENTRIC, BUTTWELD, INCONEL 600 PER ASTM B366 GRADE-CAPTIVE USE | 1 in x 1 in | $51.12 |
PIPE FITTINGS - 0.5 ELBOW -90 DEGREE, BUTTWELD, INCONEL 600 PER ASTM B366 GRADE | 1-1/4 in x 1-1/4 in | $78.84 |
PIPE FITTINGS- 0.5 ELBOW-90 DEGREE, BUTTWELD, INCONEL, 600 PER ASTM B366 GRADE-CAPTIVE USE | 1-1/2 in x 1-1/2 in | $105.66 |
PIPE FITTINGS - SS FLANGE - BLRF FLANGE1.5 CL 150 INCONEL 800 | 2-1/2 in x 2-1/2 in | $186.55 |
Grade | C | Mn | Si | S | Cu | Fe | Ni | Cr |
---|---|---|---|---|---|---|---|---|
600 | 0.15 max | 1.00 max | 0.50 max | 0.015max | 0.50 max | 6.00 – 10.00 | 72.00 min | 14.00 – 17.00 |
601 | 0.10 max | 1.0 max | 0.5 max | 0.015 max | 1.0 max | Balance | 58.0 – 63.0 | 21.0 – 25.0 |
625 | 0.10 max | 0.50 max | 0.50 max | 0.015 max | - | 5.0 max | 58.0 min | 20.0 - 23.0 |
718 | 0.08 max | 0.35 max | 0.35 max | 0.015 max | 0.30 max | - | 50.00 - 55.00 | 17.00 - 21.00 |
Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
---|---|---|---|---|---|
600 | 8.47 g/cm3 | 1413 °C (2580 °F) | Psi – 95,000 , MPa – 655 | Psi – 45,000 , MPa – 310 | 40 % |
601 | 8.1 g/cm3 | 1411 °C (2571 °F) | Psi – 80,000 , MPa – 550 | Psi – 30,000 , MPa – 205 | 30 % |
625 | 8.4 g/cm3 | 1350 °C (2460 °F) | Psi – 1,35,000 , MPa – 930 | Psi – 75,000 , MPa – 517 | 42.5 % |
718 | 8.2 g/cm3 | 1350 °C (2460 °F) | Psi – 1,35,000 , MPa – 930 | Psi – 75,000 , MPa – 482 | 45 % |
STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
---|---|---|---|---|---|---|---|
600 | 2.4816 | N06600 | NCF 600 | NA 13 | МНЖМц 28-2,5-1,5 | NC15FE11M | NiCr15Fe |
601 | 2.4851 | N06601 | NCF 601 | NA 49 | XH60BT | NC23FeA | NiCr23Fe |
625 | 2.4856 | N06625 | NCF 625 | NA 21 | ХН75МБТЮ | NC22DNB4M | NiCr22Mo9Nb |
718 | 2.4668 | N07718 | - | - | - | - | - |
Seamless/ Welded 100% Radiography Tested
Products | Size | |
---|---|---|
ASTM B366 Inconel Elbow – Long Radius | ASTM B366 Inconel Stub Ends | Sizes 1/2″ – 24″ |
ASTM B366 Inconel Elbow – Short Radius | ASTM B366 Inconel Cross | |
ASTM B366 Inconel Reducing Elbow | ASTM B366 Inconel Reducing Cross | |
ASTM B366 Inconel 45° Elbow | ASTM B366 Inconel Tees | |
ASTM B366 Inconel Fabricated Tee | ASTM B366 Inconel End Cap | |
ASTM B366 Inconel Reducer | ASTM B366 Inconel Seamless Fittings | |
ASTM B366 Inconel Concentric Reducer | ASTM B366 Inconel Pipe Nipple | |
ASTM B366 Inconel Eccentric Reducer | ASTM B366 Inconel 5D Elbow | |
ASTM B366 Inconel 3D Elbow | ASTM B366 Inconel Welded Pipe Fittings |
NPS | LBS | KG |
1/2 | 0.09 | 0.04 |
3/4 | 0.09 | 0.04 |
1 | 0.25 | 0.11 |
1¼ | 0.38 | 0.17 |
1½ | 0.4 | 0.18 |
2 | 0.81 | 0.37 |
2½ | 1.75 | 0.79 |
3 | 2.63 | 1.19 |
3½ | 3.5 | 1.59 |
4 | 4.5 | 2.04 |
5 | 7.5 | 3.4 |
6 | 12 | 5.44 |
8 | 23 | 10.43 |
10 | 43 | 19.5 |
12 | 62 | 28.12 |
14 | 80 | 36.29 |
16 | 100 | 45.36 |
18 | 126 | 57.15 |
20 | 160 | 72.57 |
22 | 197 | 89.36 |
24 | 238 | 107.95 |
26 | 275 | 124.74 |
30 | 367 | 166.47 |
36 | 531 | 240.86 |
NPS | LBS | KG |
Note:
Inconel Buttweld Fittings | Inconel Buttweld Pipe Fittings |
Alloy 625 Pipe Elbow | ASTM B366 Inconel 45°/180° Elbow |
UNS N06600 Buttweld Pipe Fittings | 718 Alloy Buttweld Fitting |
Inconel 601 Elbow | ASTM B366 Inconel Equal Tee |
600 Butt weld Pipe Fittings | ASTM B366 Inconel Concentric/Eccentric Reducer |
ANSI B16.9 Inconel 625 Reducer | Alloy 600 Pipe Fittings |
625 Seamless Pipe Fittings | 600 Welded Pipe Fittings |
ASTM B366 601 Pipe Elbow | Alloy 625 Buttweld Tee |
Inconel 718 Buttweld Reducer | ANSI 625 Inconel Pipe Fittings |
UNS N06600 Stubends | ASTM B366 Inconel Pipe Fittings |
Inconel Butt weld Fittings | UNS N06601 Pipe End Cap |
Inconel 718 45deg.Elbow | B366 Inconel 90deg. LR Elbow |
DIN 2.4816 Pipe Tee | ASTM B366 625 Cross |
DIN 2.4851 Buttweld Reducing Nipple | 601 Short Radius Elbow |
ANSI B16.9 Alloy UNS N06625 Buttweld Fitting | DIN 2.4856 End Pipe Cap |
ASTM B366 UNS N07718 Welded Pipe Fittings | DIN 2.4668 Pipe Fittings |
B366 Inconel 601 Commercial Pipe Fittings | ASTM B366 Inconel SR Elbow |
ANSI B16.9, ANSI B16.28 | ASTM B366 Inconel End Pipe Cap |
MSS SP-43, or MSS SP-79 600 Butt weld Pipe Fitting | ASTM B366 Inconel Stub End |
Inconel ASTM B366 601 Fittings | ASTM B366 Inconel Cross |
DIN 2.4816 Buttweld Pipe Fittings | ASTM B366 Inconel Reducing Tee |
Inconel Fittings | ASTM B366 Inconel Buttweld Fittings |
ASTM B366 625 Buttweld Fittings | ASTM B366 Inconel Buttweld Pipe Fittings |
ASME SB366M Inconel 718 Stub End | Inconel Buttweld Pipe Fittings |
Inconel Buttweld Fittings | UNS N06625 Buttweld Pipe Fittings |
DIN 2.4856 Tee | UNS N07718 Inconel Pipe Elbow |
600 Alloy Pipe Cap | Inconel DIN No. 2.4856 Pipe Tees |
Alloy 625 Pipe Elbow | Alloy ASTM B366 600 Pipe Fittings |
Alloy 600 Pipe Fittings | Alloy 601 Buttweld Pipe Fittings |
Alloy 625 Seamless Pipe Fittings | Alloy 600 Welded Pipe Fittings |
Alloy B366 601 Pipe Elbow Fittings | Alloy 625 Buttweld Tee Fittings |
Inconel 718 Buttweld Reducer | ANSI 625 Inconel Pipe Fittings |
UNS N06600 Stubends | ASTM B366 Inconel Pipe Fittings |
Alloy Butt weld Fittings | Inconel UNS N06601 Pipe End Cap |
Alloy 718 45deg.Elbow Fittings | B366 Alloy 90deg. LR Elbow Fittings |
Alloy DIN 2.4816 Pipe Tee | Alloy ASTM B366 625 Cross Fittings |
Alloy DIN 2.4851 Buttweld Reducing Nipple | Alloy 601 Short Radius Elbow Fittings |
Alloy 718 Welded Fittings | Alloy 600 Tee Fittings |
Alloy Industrial Pipe Fittings | Alloy 601 End Pipe Cap Fittings |
Werkstoff No 2.4668 Inconel Buttweld Pipe Fittings | Inconel 625 reducer |
Alloy 600 Seamless Pipe Fittings | Alloy 718 cross Fittings |
Nominal Pipe Size | All Fittings | All Fittings | Elbows/ Tees | All Fittings | 180 Deg Return Bends | 180° Return Bends | Reducers | 180° Return Bends | Caps |
---|---|---|---|---|---|---|---|---|---|
NPS | I.D. at End (1), (3), (4) |
O.D. at Bevel (1), (2) | Centre-to-End Dimension A,B,C,M | Wall Thickness (3) | Alignment of Ends U | Centre-to-Centre O | Overall Length H | Back-to-Face K | Overall Length E |
½ to 2½ | 0.03 | 0.06 -0.03 |
0.06 | Not less than 87.5% of nominal thickness | 0.03 | 0.25 | 0.06 | 0.25 | 0.12 |
3 to 3 ½ | 0.06 | 0.06 | 0.06 | Not less than 87.5% of nominal thickness | 0.03 | 0.25 | 0.06 | 0.25 | 0.12 |
4 | 0.06 | 0.06 | 0.06 | Not less than 87.5% of nominal thickness | 0.03 | 0.25 | 0.06 | 0.25 | 0.12 |
5 to 8 | 0.06 | 0.09 -0.06 |
0.06 | Not less than 87.5% of nominal thickness | 0.03 | 0.25 | 0.06 | 0.25 | 0.25 |
10 to 18 | 0.12 | 0.16 -0.12 |
0.09 | Not less than 87.5% of nominal thickness | 0.06 | 0.38 | 0.09 | 0.25 | 0.25 |
20 to 24 | 0.19 | 0.25 -0.19 |
0.09 | Not less than 87.5% of nominal thickness | 0.06 | 0.38 | 0.09 | 0.25 | 0.25 |
26 to 30 | 0.19 | 0.25 -0.19 |
0.12 | Not less than 87.5% of nominal thickness | … | … | 0.19 | … | 0.38 |
32 to 48 | 0.19 | 0.25 -0.19 |
0.19 | Not less than 87.5% of nominal thickness | … | … | 0.19 | … | 0.38 |
© Copyright @ Neelcon Steel All Rights Reserved. | Design & SEO by Mesotek