
Inconel belongs to a group of super alloys that are used to design some high-strength flanges. A Inconel Flange is designed with a chemical composition of nickel, chromium, and molybdenum. The content allows these flanges to connect different piping equipment in the system. The Inconel 600 Flange is a common flange type in this grade. They are designed with a density of 8.47 g/cm3 and can work in higher temperatures. Inconel 625 Flanges are very identical to the 600 type; however, the 625 grades show higher corrosion resistance due to the presence of higher chromium content. The Alloy 625 Flanges also have superior mechanical performance and are purer than the latter.
The Uns N06625 Slip On Flange is a common and versatile flange type that is easily slid on the piping grade and welded in place using one or two fillet welds. Wnr 2.4816 Slip-on Flange are mostly prepared for use in low-pressure applications and cannot handle extreme loads and pressures in harsh environments. Nickel Alloy 600 Weld Neck Flange is designed with a long protruding hub. The hub firmly grips around the piping component and provides support to it. The Alloy 625 Wnrf Flange is a common feature in stress-induced setups and is widely utilized in high-pressure and temperature applications. The Inconel 600 Blind Flange is a component that doesn’t have a face type. These flanges are used to seal or cut the flow of fluids or gases at the end of the line. The Asme Sb 564 N06625 Blrf Flange is a type of blind flange that is employed in pressurized vessel flanges.
The Alloy 625 Socket Weld Threaded Flanges is a flange type that is inserted into the pipe at the socket end. These flanges have threads that align to different piping grades. An Inconel 625 Ring Type Joint Flange is a good alternative to raised face flanges. The flange type has a machined metallic ring having grooves on its face. The flange provides a leak-proof sealing to the connection. Nickel 600 Forged Flange is produced through the forging process and can be shaped in different dimensions. If you have any queries or questions about the Inconel 625 Flange or its pricing, contact us for more information.
Standards | ASTM, ASME |
---|---|
Designation | B564, SB564 |
Dimension Standard | ANSI/ASME B 16.47 Series A & B, B16.5, BS4504, B16.48, BS 10, DIN, EN-1092, etc. |
Standards | ASME, ANSI, BS, EN, DIN Inconel Flanges Manufacturer. |
Flange Face Type | Raised Face, Flate Face, Ring Type Joint |
Size | 1/2" (15 NB) upto 48" (1200NB) |
Class | Class 300, Class 2500, Class 150, Class 400, Class 900, Class 600, Class1500 Inconel 600 Flanges Manufacturer| PN6, PN16, PN40, PN10, PN25, PN64 etc. |
Products | Pipe Size | Flange Outside Diameter | Number of Bolt Holes | Price |
---|---|---|---|---|
BLIND FLANGE 2 150# RF ASME B16.5 50-150RF-INCONEL 600(1 PCS) | 1/2 in | 3-1/2 in | 4 | $18.20 |
INCONEL 825 FLANGE WNRF, SB 564 UNS08825 SIZE 10 X SCH10S, X300# (QTY : 2 PCS) | 3/4 in | 3-7/8 in | 4 | $20.05 |
BLIND FLANGE ASTM B166 UNS N06600 (INCONEL 600) CL 150 B16.5 SIZE: 6 | 1 in | 4-1/4 in | 4 | $21.04 |
INCONEL 625 WNRF FLANGE TO ASTM B 564 GR. UNS NO. 6625 DIMN B 16.5., SIZE : 33.4 MM OD x 900# X 3.38 MM THK | 1-1/4 in | 4-5/8 in | 4 | $24.49 |
FLANGE SW INCONEL-600 SIZE: 8X150# CLASS | 2 in | 6 in | 4 | $44.92 |
Standard | Bolt Hole Dia | Class | Dia | Dia of Bolt Circle | Bolts Number | Size of Bolt |
---|---|---|---|---|---|---|
Flanges ANSI B16.5 | 16 | ANSI 150 Flanges | 89 | 60 | 4 | 13 |
14 | PN14 Flanges | 95 | 67 | 4 | M12 | |
22 | ANSI 1500 Flanges | 121 | 83 | 4 | 19 | |
16 | ANSI 600 Flanges | 95 | 67 | 4 | 13 | |
16 | ANSI 300 Flanges | 95 | 67 | 4 | 13 | |
22 | ANSI 900 Flanges | 121 | 83 | 4 | 19 | |
Flange AS 2129 | 14 | Table D Flanges | 95 | 67 | 4 | 13 |
14 | Table C Flanges | 95 | 67 | 4 | 13 | |
17 | Table J Flanges | 114 | 83 | 4 | 16 | |
14 | Table F Flanges | 95 | 67 | 4 | 13 | |
14 | Table E Flanges | 95 | 67 | 4 | 13 | |
17 | Table H Flanges | 114 | 83 | 4 | 16 | |
Flange ISO 7005 (DIN) | 14 | PN10 Flanges | 95 | 65 | 4 | M12 |
11 | PN6 Flanges | 80 | 55 | 4 | M10 | |
14 | PN40 Flanges | 95 | 65 | 4 | M12 | |
16 | PN20 Flanges | 90 | 60.5 | 4 | M14 | |
14 | PN16 Flanges | 95 | 65 | 4 | M12 | |
14 | PN25 Flanges | 95 | 65 | 4 | M12 |
Inconel Flanges | Element | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Fe | Co | Al | Cr | Si | Ni | Ti | Nb | S | Mo | B | P | Cu | C | Mn | |
600 | 6.00 to 10.00 | 14.00 to 17.00 | 0.05 | 72.00 | 0.0015 | 0.05 | 0.015 | 1.00 | |||||||
617 | 3.00 | 10.00 to 15.00 | 0.08 to 1.05 | 20.00 to 24.00 | 0.05 | 44.02 to 56.00 | 0.06 | 0.0015 | 8.00 to 10.00 | 0.0006 | 0.0015 | 0.05 | 0.015 | 0.05 | |
625 | 5.00 | 1.00 | 0.04 | 20.00 to 23.00 | 0.05 | 58.00 | 0.04 | 3.015 to 4.015 | 0.0015 | 8.00 to 10.00 | 0.0015 | 0.01 | 0.05 | ||
690 | 9.02 | 0.002 | 30 | 0.035 | 59.05 | 0.0003 | 0.001 | 0.0019 | 0.035 | ||||||
718 | Balance | 1.00 | 0.065 to 1.015 | 17.00 to 21.00 | 0.035 | 50.00 to 55.00 | 0.03 | 4.075 to 5.05 | 0.0015 | 2.08 to 3.03 | 0.0006 | 0.0015 | 0.02 to 0.08 | 0.008 | 0.035 |
X-750 | 5.00 to 9.00 | 1.00 | 0.04 to 1.00 | 14.00 to 17.00 | 0.05 | 70.00 | 2.025 to 2.075 | 0.07 to 1.02 | 0.001 | 0.05 | 0.008 | 1.00 |
Elongational (% in 50mm) min | Yield Properties 0.2% Proof (MPa) min | Tensile Properties (MPa) min | Hardness | |
---|---|---|---|---|
Rockwell B (HR B) max | Brinell (HB) max | |||
42.5 | MPa – 517, Psi – 75,000 | MPa -930, Psi – 1,35,000 | – | – |
EURO | UNS | ALLOY | ASTM |
---|---|---|---|
2.4627 | N06601 | 601 | B166 |
2.4816 | N06600 | 600 | B166 |
1.4668 | N07718 | 718 | B637 |
2.4856 | N06625 | 625 | B446 |
1.4529 | N08925 | 925 | B805 |
1.4876 | N08800 | 800 | B408 |
2.4669 | N07750 | 750 | B637 |
2.4858 | N08825 | 825 | B425 |
Inconel 600 Flange | ASTM B564 Inconel Flange |
Class 300 Inconel 600 Socket Weld Flange | Inconel Pipe Flange |
Inconel Weld Neck Flange | Inconel 625 Slip on Flanges |
Alloy 625 Flanges | Inconel Weld Neck Flange |
Inconel 625 Flanges | ANSI B16.5 Inconel Alloy Flange |
Uns N06625 Slip On Flange | ASME SB 564 Inconel Flanges |
Nickel Alloy 625 Weld Neck Flange | Inconel Slip-On Flanges |
Astm B564 Uns N06625 Pipe Flange | Inconel Alloy Blind Flanges |
Inconel Socket Weld Flanges | Asme Sb 564 N06625 Blrf Flange |
Alloy 625 Wnrf Flange | ASTM B564 Inconel Threaded Flanges |
Inconel 625 Ring Type Joint Flange | Inconel Weld-Neck Flanges |
Alloy 625 Socket Weld Threaded Flanges | ANSI B16.5 Inconel 600 Flange |
Din 2.4856 Lwrf/ Wnrf Flange | Inconel Alloy 625 Pipe Flanges |
Astm B564 Uns N06600 Blind Flange | JIS NCF 600 Flanges |
Nickel Alloy 600 Weld Neck Flange | Nickel Alloy 600 Flanges |
Wnr 2.4816 Slip-on Flange | Inconel Alloy 600 Flanges |
Uns N06600 Long Weld Neck Flange | Inconel 625 Slip on Flanges |
Nickel 600 Forged Flange | ASTM B564 Alloy 625 Blind Flanges |
Asme Sb564 N06600 Threaded Reducing Flange | Alloy 625 Weld Neck Flanges |
Class 150 Astm B564 Uns N06600 Wnrf Flange | 600 Inconel Forged Flanges |
Inconel 625 Flange | Alloy 625 Socket weld Flanges |
Inconel 600 Blind Flange | ASME SB564 Alloy 600 Lap Joint Flanges |
ASTM B564 UNS N06600 Inconel Flange | Inconel N06600 Orifice Flanges |
Class 300 Inconel 600 Rtj Flange | Inconel® Alloy 625 RTJ Flanges |
Alloy 600 Flanges | Alloy 600 Long Weld Neck Flanges |
© Copyright @ Neelcon Steel All Rights Reserved. | Design & SEO by Mesotek