Inconel 625 Plate supplier in India

Alloy 625 Sheet stockist in Mumbai, view ASTM B443 UNS N06625 Grade 1/ Grade 2 specification and price list

2.4856 Sheet and Alloy 625 strip available in cut to size, you can order in exact sizes to save your cost, NABL approved Inconel 625 Sheet supplier in India

Inconel 625 is a solution strengthened austenitic steel grade. These components are designed with an outstanding content of nickel, chromium, and molybdenum. This gives the Inconel 625 Plate enhanced resistance to corrosive and oxidative media in harsh environments. These plates show a thickness of above 6mm, extending up to 100mm or more. The versatile grade of plates works well in cryogenic and high temperatures up to 1800 degrees F. The Alloy 625 Plate is non-magnetic in nature and shows enhanced strength and outstanding creep rupture properties in stress-induced setup. These plates are designed with enhanced mechanical performance and have a tensile strength of 940mpa with a yield strength of 430mpa. The robust plates can be readily elongated by 50% in the system.

The Inconel 625 Sheet is processed and produced in an array of hot or cold working procedures. Designed in thickness between 0.5mm and lower than 6mm, these sheets are resistant to attacks in mild and marine environments. Inconel 625 Strips are available in different sizes and dimensions. These strips play a pivotal role in welding procedures that are performed in standard configurations. The components in this grade are designed with the best raw materials and latest technology by our esteemed workers. If you have any questions or queries contact us for more information.

What are ASTM B443 UNS N06625 grade 1 and grade 2?

• ASTM B443 UNS N06625 grade 1 is a module that is designed in the annealed condition and is available in service temperatures up to 593 degrees C.
• ASTM B443 UNS N06625 grade 2 is a component that is produced via solution annealed condition. This grade is used in service temperatures in the range of above 593 degrees C, where there is a higher requirement for resistance to creep and rupture.

Inconel 625 Plate Specification

Other Trade Name	Alloy 625 Nickel 625 Haynes 625® (Haynes International) Inconel 625® (Special Metals)
Thickness	0.1 upto 100 mm Thk
Specification	ASTM B 443 Gr 1 VdTüV 499 UNS N06625 ASME SB 443 Gr 1 UNS N06626-625LCF AMS 5599 ISO 6208 EN 10095 BS 3072NA21 AMS 5869 WERKSTOFF Nr 2.4856 DIN 17750
Length	2m, 3m, 2.44m, or as required
International Standard	EN 2.4856 EN 10204 EMS95377 S1000 / S-SPEC-1 PWA LCS RR SABRe Edition 2 DFARS Compliant AeDMS S-400 GE Aviation S-SPEC-35
Width	10 upto 2500mm
Dimensions	0.5-6.4 mm Cold rolled Inconel 625 Plate 3.0–10.0 mm Hot rolled Inconel 625 Plate
Form	Plain Sheet, Flats, annealed, Rolls, Coils, Strip, tread plate, Flat Shim, Checker Plate, Rolling Sheet, descaled, Clad Plate, soft annealed, Plate, Shim Sheet, Rolling Plate, sheared, Sheet, Flat Sheet, Foils, Blank (Circle)
Types of Inconel 625 Plate supplier in India	Cold rolled sheet (CR), Hot rolled plate (HR), Annealed

Nickel Alloy 625 Sheet Price

Products	Thickness	Width	Length	Price
290 MM x 40 MM ALLOY 625 PLATE DISC ASTM B 443 GRADE UNS NO. 6625	1/40 in	12 in	12 in	$10.05 / each
250 MM x 500 MM x 1 MM THK 625 INCONEL PLATE GRADE UNS NO. 6625	1/40 in	24 in	24 in	$31.16 / each
10 MM X 150 X 300 INCONEL 625 PLATE	4/125 in	6 in	12 in	$6.78 / each
RPL-010-5541-0000 PLATE 10MMX155MMX155MMFOR QUALIFICATION INCONEL 625, B OR SB-443-N06625 (PLATE)	4/125 in	12 in	12 in	$13.57 / each
NICKEL ALLOY INCONEL 625 PLATE AMS 5599 9.53MMX50.4 MMX 50.4MM .375X1.98X1.98	4/125 in	24 in	24 in	$42.16 / each

Types of JIS NCF 625 Plate

Check AMS 5599 Sheet thickness tolerance and ASTM B443-625-gr 1 material price in Asia, buy Alloy 625 Plate at dealer price in India

Features

• Chloride stress resistance
• Fresh Water, Salt, and alkaline chemical resistance
• Heat and cold resistance
• Stability during welding
• Scaling and oxidization resistance
• Corrosion cracking resistance

Alloy Inconel 625 Sheet Equivalent

STANDARD	BS	WERKSTOFF NR.	GOST	UNS	AFNOR	JIS	EN
Inconel 625	NA 21	2.4856	ХН75МБТЮ	N06625	NC22DNB4MNiCr22Mo9Nb	NCF 625	NiCr23Fe

• AMS 5599 DDQ
• AMS 5599
• AMS 5879 LCF
• AMS 5869
• ASME SB 443
• ASTM B443
• DIN 17750
• BS 3075 NA21

ASTM B443 Inconel 625 Coil Chemical Composition

Ni	Ph	Cr	S	Fe	Al	Mo	Ti	Nb+Ta	Co	C		Si	Mn
Min	-	Bal	-	20	-	-	-	8	-	3.15	-	-	-
Max	0.50	-	0.015	23	0.015	5	0.40	10	0.40	4.15	1.0	0.50	0.10

AMS 5599 Alloy 625 Inconel Plate Mechanical Properties

Tensile Properties	0.2% Proof Stress	Reduction of area	Elongation	Hardness
MPA	MPA	%	%	HRB
Min	Min	Min	Min	Min
827	414	40	30	145

Supplier of Inconel 625 Shim Stock and Alloy 625 Coil in India, check Nickel 625 Plate specification and price in Mumbai

ASTM B443 625 Alloy Plate Thicknesses

Thickness	Max Width
0.0009" - 0.0004" (0.025 - 0.01mm)	15.5" (393.7mm) as a rolled edge 15.0" (381.0mm) with slit edge
0.025"- 0.003" (0.635 - 0.08mm)	17.5" (444.5mm) as a rolled edge 17.0" (431.8mm) with slit edge
0.00039" - 0.00008" (0.0099 - 0.002mm)	4.25" (107.95mm) as a rolled edge 4.0" (101.6mm) with slit edge
0.0029" - 0.001" (0.079 - 0.0254mm)	16.5" (419.1mm) as a rolled edge 16.0" (406.4mm) with slit edge

2.4856 Inconel 625 Foil Dimensions

SB 443 Alloy 625 Strip Imperial Dimensions

Width (maximum in)	Plate Surface finish	Gauge (inch)
48	BA Mexinox only	18–28
72*	2B – heat treated, skin passed, Cold rolled, pickled Plate	10–24
48	Temper rolled plate Mexinox only	13–29
60	2D – heat treated, pickled, Cold rolled plate	12–24
60	Polished plate (not brushed)	11–24

Inconel 625 Grade 2D Plate Metric Dimensions

Thickness (mm)	Plate Surface finish	Width (maximum mm)
0.25–03.5	2R – bright annealed and Cold rolled plate	1524
0.25–08.0	2B – heat treated, pickled, Cold rolled, skin passed plate	2032
0.4–06.35	2H – Work hardened plate	1524
0.4–06.35	2D – heat treated, Cold rolled, pickled plate	1524
0.5–04.0	Polished, brushed plate	1524
0.4–08.0	2E – Cold rolled, mechanically descaled, heat treated plate	2032

Check UNS N06625 material equivalent and properties, A genuine Inconel 625 Plate suppliers offer third-party inspection and MTC reports with each delivery

AMS 5540 Inconel 600 sheets Inventory

Inconel 625 Plate	Inconel 625 UNS N06625 Flat Plate
Nickel Alloy 625 Sheet	Inconel 625 Nickel Plate material
2.4856 Inconel 625 Foil	ASTM B443 Alloy 625 Plate
Alloy Inconel 625 Sheet	AMS 5599 Alloy 625 Inconel Plate
ASTM B443 Inconel 625 Coil	625 inconel Sheet
2.4856 Alloy 625 Plate	625 Inconel Plate
UNS N06625 Inconel 625 Strip	ASTM B443 625 Alloy Plate
ASTM B443 Alloy 625 Sheet	Alloy Inconel 625 Coil
Nickel Alloy 625 Coil	Inconel 625 Steel Plates
SB 443 Alloy 625 Strip	JIS NCF 625 Plate
SB 443 Inconel 625 Clad Plate	Inconel Alloy 625 Plate
625 Inconel Strip Tape	Alloy 625 UNS N06625 Shim Sheet
Inconel 625 Alloy Hot Rolled Plate	Nickel Alloy 625 Strip
Inconel Alloy 625 Shim Sheet	ASME SB168 Inconel 625 Cold Rolled Plate
Alloy 625 Inconel Shim Stock	ASME SB168 Inconel 600 Sheet
Alloy 625 Nickel Cold Rolled Plate	AMS 5540 Inconel 600 sheets
Inconel 625 Din 2.4856 Polished Plate	ASTM B443 UNS N06625 Plate
Inconel 625 Grade 2D Plate	Incoloy 2.4856 Plate