Inconel 625 Pipe

Alloy 625 Seamless Tube Supplier in India

ASTM B163 UNS N06625 Tubing Stockist and Exporter in Mumbai. Check Price List of astm b444 uns n06625 gr.1 pipe

What is Inconel 625 Pipe?
Inconel 625 is an austenitic grade of steel. These pipes are designed with a superior composition of nickel, chromium, and molybdenum allowing the pipes to transport fluids and gases in corrosive and oxidative media. The alloy 625 pipes can be used in temperatures up to 1800 degrees F and are highly resistant to attacks in mild or alkaline conditions. The pipes work well in marine environments, where they are susceptible to pitting and crevice corrosion. The Inconel grade 625 pipes have good strength and showcase superior mechanical properties. These components have a minimum tensile strength of 940mpa with a minimum yield strength of 430mpa and can be elongated by 51.5%. Designed with a hardness between 32 to 40 HRC, the alloy 625 pipe is difficult to machine and process.

What is Inconel 625 tube used for?
The Inconel 625 tube is a versatile grade that is employed in the transportation of fluids or gases and is commonly seen in.

• Jet engine components
• Pollution control systems
• Heat exchanger items
• Marine services
• Nuclear power plants and reactor cores
• Oil and gas refining and processing industry
• Electrical cable connectors for communication services

How do I know if my Alloy 625 Tube is seamless?
A seamless tube is produced by passing hot steel billets through an extrusion process and doesn’t show the presence of welds on the surface of the tube. These tubes are generally designed in sizes up to only 24 inches.

Which testings are required for Inconel 625 Seamless Pipe and why?
Inconel 625 pipe testing procedures are important in the detection of any weakness and predicting the quality of the material. The pipes are generally put through three non-destructive tests.

• Ultrasonic testing- This test helps in detecting defects in the dimensions and help in determining the length of the grade.
• Magnetic flux leakage testing- This is a non-destructive test where the material is tested on the ferromagnetic changes. Any leakage in the module is measured based on the magnetic flux in large caliber seamless material.
• Eddy current testing- The process is based around the theory of electromagnetic agent that is designed without a coupling agent. It helps in the detection of bulbs and can be used in measuring seamless pipes of different configurations. 

What is ASTM B444 UNS N06625?
ASTM B444 UNS N06625 is a standard specification of nickel, columbium, chromium, and molybdenum alloys. These components are designed in annealed and solution annealed conditions as per their grades. The items in this grade are subjected to tensile, yield, and elongation testing procedures to ensure that they work in different conditions. These alloys are ductile and can be easily electroplated or welded in place.

Inconel 625 Pipe Specification

Specifications	ASTM B 167/B 829/B 517and ASME SB 167/SB 829/SB 517
Form	Round, Hydraulic Etc
Specialized in	Large Diameter Size
Schedule	Schedule 5 to 160
Dimensions	ASME, API and ASTM
Different type of Inconel 625 Tube supplier	ERW / Seamless / Welded / LSAW/ Fabricated Pipes
Welded 625 Pipes	5.0 mm upto 1219.2 mm
Length	Double Random, Cut Length and Single Random
Seamless 625 Pipes	From 4 to 219mm and W. T. from 0.5 to 20mm
Various sizes of Inconel 625 Pipe supplier and manufacturer	15″NB upto 150″NB IN
EFW 625 Pipes	5.0 mm – 1219.2 mm
End	Beveled End, Plain End, Treaded

AMS 5581 Alloy 625 Tube Price Per Kg

Products	Outside Dia.	Inside Dia.	Wall Thickness	Max. Pressure	Price
INCONEL 625 ERW PIPES-141.3MM OD X 3MM THK -6000MM LONG	1/4 in	0.152 in	0.049 in	6918 psi at 72 Degrees F	$231.18 / each
NICKEL ALLOY DEFECTIVE WELDED PIPE GRADE INCONEL 625	3/8 in	0.305 in	0.035 in	3084 psi at 72 Degrees F	$263.86 / each
INCONEL ALLOY 625 (UNS N06625) SEAMLESS PIPE CONF.TO SPECN ASME SB444 GR.2, 6 NB SCH 80 (10.400 M)	1/2 in	0.402 in	0.049 in	3184 psi at 72 Degrees F	$334.54 / each
INCONEL 625 SEAMLESS PIPE: SIZE: 1/4 XSCH80 (3 -4MM THK) (2.2 MTR LONG)	3/4 in	0.62 in	0.065 in	2894 psi at 72 Degrees F	$812.52 / each
INCONEL 625 SMLS PIPE TO ASTM B 444 GR.UNS NO. 6625 GR 2, IN 1.7 MTRS LENGTH SIZE : 73.02 MM OD x 3.2 MM THK	1 in	0.834 in	0.083 in	2779 psi at 72 Degrees F	$2,405.40 / each

Alloy 625 Pipe Types

ASTM B444 UNS N06625 Gr.1 Pipe Pressure Rating

Size mm	Grade	Maximum internal pressure, ksi
		400°F	100°F	600°F	200°F	700°F	300°F	500°F
1.59 x 0.36	N06625	18.83	19.21	18.15	19.21	17.77	19.02	18.54
3 x 0.5	N06625	921	940	888	940	869	930	907
6 x1	N06625	921	940	888	940	869	930	907
8x1	N06625	668	681	644	681	630	675	658
8x2	N06625	1447	1476	1395	1476	1366	1462	1425
10x1	N06625	524	534	505	534	494	529	516
12x1	N06625	431	440	415	440	407	435	424
16x1	N06625	318	324	307	324	300	321	313

Check inconel 625 heat exchanger tube sizes in Stock and Nickel Alloy 625 capillary tube dimensions.

Inconel 625 Seamless Pipe Schedule Chart

3 1/2" IPS( 4.000"O. D.)	1/8" IPS(.405"O. D.)
SCH 10, 40, 80, 160, XXH	SCH 40, 80
5" IPS( 5.563"O. D.)	3/8" IPS(.675"O. D.)
SCH 10, 40, 80, 160, XXH	SCH 10, 40, 80
4" IPS(4.500"O. D.)	1/4" IPS(.540"O. D.)
SCH 10, 40, 80, 160, XXH	SCH 10, 40, 80
6" IPS(6.625"O. D.)	1/2" IPS(.840"O. D.)
SCH 5, 10, 40, 80, 120, 160, XXH	SCH 5, 10, 40, 80, 160, XXH
10" IPS(10.750"O. D.)	1" IPS:(1.315′O. D.)
SCH 10, 20, 40, 80 (.500), TRUE 80(.500)	SCH 5, 10, 40, 80, 160, XXH
8 ” IPS(8.625"O. D.)	3/4" IPS(1.050"O. D.)
SCH 5, 10, 40, 80, 120, 160, XXH	SCH 10, 40, 80, 160, XXH
12" IPS(12.750"O. D.)	1-1/4" IPS(1.660"O. D.)
SCH 10, 20, 40(.375), TRUE40(.406), SCH80(.500)	SCH 10, 40, 80, 160, XXH
16" IPS(16.000"O. D.)	2" IPS(2.375"O. D.)
SCH10(.188), SCH40(.375)	SCH 10, 40, 80, 160, XXH
14" IPS(14.000"O. D.)	1-1/2" IPS(1.900"O. D.)
SCH10 (.188), SCH40 (.375)	SCH 10, 40, 80, 160, XXH
18" IPS (18.000"O. D.)	2 1/2" IPS(2.875"O. D.)
SCH-40 (.375)	SCH 10, 40, 80, 160, XXH
	3" IPS( 3.500"O. D.)
	SCH 5, 10, 40, 80, 160, XXH

UNS N06625 Welded Pipe Weight Chart

NPS	OD			WT		Weight	Weight
	mm	in	Scheduled	mm	in	Lb/ft	kg/Mtr
1/2″	21	0.840	40 STD	2.769	0.109	0.851	1.268
			80 STD	3.734	0.147	1.088	1.621
3/4″	27	1.050	40 STD	2.870	0.113	1.131	1.684
			80 STD	3.912	0.154	1.474	2.195
1″	33	1.315	40 STD	3.378	0.133	1.679	2.501
			80 STD	4.547	0.179	2.172	3.325
1 1/4″	42	1.660	40 STD	3.556	0.140	2.273	3.385
			80 STD	4.851	0.191	2.997	4.464
1 1/2″	48	1.900	40 STD	3.683	0.145	2.718	4.048
			80 STD	5.080	0.200	3.361	5.409
2″	60	2.375	40 STD	3.912	0.154	3.653	5.441
			80 STD	5.537	0.218	5.022	7.480
2 1/2″	73	2.875	40 STD	5.516	0.203	5.793	8.629
			80 STD	7.010	0.276	7.661	11.411
3″	89	3.500	40 STD	5.486	0.216	7.576	11.284
			80 STD	7.620	0.300	10.253	15.272
4″	114	4.500		6.020	0.237	10.790	16.073
				8.560	0.337	14.983	22.318
6″	168	6.625		4.775	0.188	12.924	19.252
				5.516	0.203	13.923	20.739
				5.563	0.219	14.983	22.318
				6.350	0.250	17.021	25.354
			40 STD	7.112	0.280	18.974	58.263
				7.925	0.312	21.036	31.334
				9.525	0.375	25.031	37.285
			80 XHY	10.973	0.432	28.573	42.561
				12.700	0.500	32.708	48.719
8″	219	8.625		4.775	0.188	16.940	25.233
				5.156	0.203	18.259	27.198
				5.563	0.219	19.661	29.286
			20	6.350	0.250	22.361	33.308
			30	7.036	0.277	24.696	36.786
			40	8.179	0.322	28.554	42.352
				9.525	0.375	33.041	49.216
			60	10.312	0.406	35.638	53.085
			80 XHY	12.700	0.500	43.388	64.627
10″	273	10.750		4.775	0.188	21.207	31.588
				5.563	0.219	24.631	36.689
			20	6.350	0.250	28.035	41.759
			30	7.798	0.307	34.240	51.002
				8.738	0.344	38.231	56.946
			40 STD	9.271	0.365	40.483	63.301
				11.125	0.438	48.238	71.852
			60 XHY	12.700	0.500	54.735	81.530
			80	15.088	0.594	64.429	95.969
12″	324	12.750		4.775	0.188	25.222	37.570
				5.563	0.219	29.309	43.657
				6.350	0.250	33.375	49.713
				7.137	0.281	37.420	55.739
				7.925	0.312	41.445	61.735
				9.525	0.375	49.562	73.824
				10.312	0.406	53.525	79.727
				12.700	0.500	65.415	97.438
				14.275	0.562	73.154	108.966
14″	356	14.000		4.775	0.188	27.732	41.308
				5.563	0.219	32.233	48.012
			20	6.350	0.250	36.713	54.685
				7.137	0.281	41.172	61.327
				7.925	0.312	45.611	67.939
			STD	9.525	0.375	54.568	81.281
			40	11.125	0.438	63.441	94.498
			XHY	12.700	0.500	72.090	107.381
				15.875	0.625	89.278	132.983
16”	406	16.000		4.775	0.188	21.748	47.290
				5.563	0.219	36.910	54.980
			10	6.350	0.250	42.053	62.639
				7.137	0.281	47.174	70.268
			20	7.925	0.312	52.275	77.866
				8.738	0.344	57.519	85.677
			30 STD	9.525	0.375	62.578	93.213
				11.125	0.438	72.797	108.433
			40 XHY	12.700	0.500	82.770	123.289
18″	457	18.000		5.563	0.219	41.588	61.948
				6.350	0.250	47.393	70.593
				7.137	0.281	53.176	79.208
			20	7.925	0.312	58.939	87.792
			STD	9.525	0.375	70.588	105.144
			30	11.125	0.438	82.152	122.369
			XHY	12.700	0.500	93.450	139.198
			40	14.275	0.562	104.666	155.904
				15.875	0.625	115.978	172.754
20″	508	20.000		6.350	0.250	52.733	78.547
				7.163	0.282	59.386	88.458
				7.925	0.312	65.604	97.719
			20 STD	9.525	0.375	78.598	117.075
				11.125	0.438	91.508	136.305
			30 XHY	12.700	0.500	104.130	155.106
			40	15.088	0.594	123.110	183.378
				15.875	0.625	129.328	192.640
				17.475	0.688	141.901	211.368
24″	610	24.000		6.350	0.250	63.413	94.456
				7.137	0.281	71.183	106.029
				7.925	0.312	18.932	117.573
			20 STD	9.525	0.375	64.618	140.938
				11.125	0.438	110.219	164.176
			XHY	12.700	0.500	125.490	186.923
				15.875	0.625	156.028	232.410
			40	17.475	0.688	171.293	255.148
				19.050	0.750	186.233	277.401
30″	762	30.000		6.350	0.250	79.433	118.318
				7.137	0.281	89.189	132.851
			10	7.925	0.312	98.925	147.353
			STD	9.525	0.375	118.648	176.731
				11.125	0.438	138.286	205.983
			20 XHY	12.700	0.500	157.530	234.647
			30	15.875	0.625	196.078	292.066
				17.475	0.688	215.380	320.817
				19.050	0.750	234.293	348.988
36″	914	36.000		6.350	0.250	95.453	142.180
				7.137	0.281	107.196	159.672
			10	7.925	0.312	118.918	177.133
			STD	9.525	0.375	142.678	215.525
				11.125	0.438	166.353	247.790
			20 XHY	12.700	0.500	198.570	282.372
				15.875	0.625	236.128	351.723
				17.475	0.688	259.467	386.487
				19.050	0.750	282.353	420.576
42″	1067	42.000		7.925	0.312	138.911	206.914
			STD	9.525	0.375	166.708	248.319
			XHY	12.700	0.500	221.610	33.097
				19.050	0.750	330.413	492.163
48″	1219	48.000	STD	9.525	0.375	190.738	284.112
				11.125	0.438	222.487	331.404
			XHY	12.700	0.500	253.650	377.822
				19.050	0.750	378.473	563.750
				22.225	0.875	440.383	655.969

Buy Inconel 625 Seamless Pipe of Reputed Manufacturers of India also view W.Nr. 2.4856 Material price per KG in Mumbai

DIN 2.4856 Erw Pipe Dimensions

NOMINAL SIZE [INCHES]	WALL THICKNESS [MM]	WALL THICKNESS [INCHES]	WEIGHT [KG/M]	WEIGHT [LB/FT]	OUTSIDE DIAMETER[MM]	OUTSIDE DIAMETER [INCHES]
1/4" NPS 8	2.24	0.088	0.63	0.42	13.7	0.54
3/8" NPS 10	2.31	0.091	0.84	0.57	17.1	0.68
1/8" NPS 6	1.73	0.068	0.37	0.24	10.3	0.41
1/2" NPS 15	2.77	0.109	1.27	0.85	21.3	0.84
3/4" NPS 20	2.87	0.113	1.69	1.13	26.7	1.05
1" NPS 25	3.38	0.133	2.5	1.68	33.4	1.32
1 1/4" NPS 32	3.56	0.14	3.39	2.27	42.2	1.66
1 1/2" NPS 40	3.68	0.145	4.05	2.72	48.3	1.9
2" NPS 50	3.91	0.154	5.44	3.65	60.3	2.375
2 1/2" NPS 65	5.16	0.203	8.63	5.79	73.0	2.875
3" NPS 80	5.49	0.216	11.29	7.58	88.9	3.5
3 1/2" NPS 90	5.74	0.226	13.57	9.11	101.6	4.0
4" NPS 100	6.02	0.237	16.07	10.79	114.3	4.5
5" NPS 125	6.55	0.258	21.77	14.62	141.3	5.563
6" NPS 150	7.11	0.28	28.26	18.97	168.3	6.625
8" NPS 200	8.18	0.322	42.55	28.55	219.1	8.625
10" NPS 250	9.27	0.365	60.31	40.48	273.0	10.75
12" NPS 300	10.31	0.406	79.73	53.52	323.8	12.75
14" NPS 350	11.13	0.437	94.55	54.57	355.6	14.0
16" NPS 400	12.7	0.5	123.3	82.77	406.4	16.0
18" NPS 450	14.27	0.562	155.8	104.67	457.0	18.0
20" NPS 500	15.09	0.594	183.42	123.11	508.0	20.0
24" NPS 600	17.48	0.688	255.41	171.29	610.0	24.0
32" NPS 800	17.48	0.688	342.91	230.08	813.0	32.0

Inconel Alloy 625 Round Pipe Chemical Composition

Grade		S	C	Al-Ti	Mn	Cr2	Si	Ni	Fe
625	min.	–	–	–	–	20.0	–	58.0	–
	max.	0.015	0.10	0.40	0.50	23.0	0.50	–	5.0

Inconel 625 Pipe Size

OD mm	in.	WT mm	Schedule	Kg/m
13.72	1/4	1.65	10S	0.50
13.72	1/4	2.24	40S	0.64
13.72	1/4	3.02	80S	0.81
17.15	3/8	1.65	10S	0.64
17.15	3/8	2.31	40S	0.86
17.15	3/8	3.20	80S	1.12
21.34	1/2	2.11	10S	1.02
21.34	1/2	2.77	40S	1.29
21.34	1/2	3.73	80S	1.65
26.67	3/4	2.11	10S	1.30
26.67	3/4	2.87	40S	1.71
26.67	3/4	3.91	80S	2.23
33.40	1	2.77	10S	2.13
33.40	1	3.38	40S	2.54
33.40	1	4.55	80S	3.29
33.40	1	6.352)	160	4.30
42.16	1¼	2.77	10S	2.73
42.16	1¼	3.56	40S	3.44
42.16	1¼	4.85	80S	4.53
42.16	1¼	6.352)	160	5.69
48.26	1½	2.77	10S	3.16
48.26	1½	3.68	40S	4.11
48.26	1½	5.08	80S	5.49
60.33	2	2.77	10S	3.99
60.33	2	3.91	40S	5.52
60.33	2	5.54	80S	7.60
60.33	2	8.742)	160	11.29
73.03	2½	3.05	10S	5.35
73.03	2½	5.16	40S	8.77
73.03	2½	7.01	80S	11.59
88.90	3	3.05	10S	6.56
88.90	3	5.49	40S	11.47
88.90	3	7.62	80S	15.51
88.90	3	11.132)	160	21.67
101.60	3½	3.05	10S	7.53
101.60	3½	5.74	40S	13.78
101.60	3½	8.08	80S	18.92
114.30	4	3.05	10S	8.50
114.30	4	6.02	40S	16.32
114.30	4	8.56	80S	22.67
114.30	4	13.492)	160	34.05
141.30	5	6.55	40S	22.10
141.30	5	9.53	80S	31.44
141.30	5	15.882)	160	49.87
168.28	6	3.4	10S	14.04
168.28	6	7.11	40S	28.69
168.28	6	10.97	80S	43.21
168.28	6	14.27	120	54.75
168.28	6	18.262)	160	68.59
219.08	8	8.18	40S	43.20
219.08	8	12.7	80S	65.63
219.08	8	18.23	120	91.30
219.08	8	23.012)	160	112.97

ASTM B444 Inconel 625 Tube Size

Wall Thickness	Inconel Tube Sizes ( O.D.)
.083	1/4", 1 5/8", 2 1/2",3", 7/8", 1", 1 7/8", 5/8", 1 1/4", 3/4", 3/8", 1/2", 2", 1 1/2"
.049	1", 1/2", 7/8", 2", 3/4", 1/4", 16", 1/4", 1/4", 1 3/8", 1 1 3/16", 1/2", 2 5/16", 1 1/8", 5/8", 5/8"
.016	3/16", 1/8"
.010	1/8", 3/16", 1/16"
.028	2", 3/16", 5/16", 3/4", 1 1/2", 1/4", 1/8", 1/2", 1", 3/8"
.020	1/8", 1/16", 1/4", 3/8", 3/16", 5/16"
.035	2", 3/8", 7/16", 1/8", 3/4", 1/2", 5/8", 1", 1 1/2", 1/4", 7/8", 2 1/4", 1 5/8", 1 1/4", 3/16", 5/16", 16"
.065	1 1/2", 1 5/8", 5/8", 3", 1 3/4", 2 1/2", 1/4", 1 1/4", 1", 3/4", 1/2", 16", 2", 7/8", 3/8", 5/16"
.120	2 1/4", 2 1/2", 3/4", 2", 1 1/2", 7/8", 3", 5/8", 1/2", 1 1/4", 1"
.012	1/8"
.095	5/8", 1/2", 1", 2", 1 1/2", 1 1/4"
.109	2", 1 1/4", 1/2", 1", 1 1/2", 3/4"
.125	3 1/4", 2", 3", 1 1/2", 1 1/4", 3/4", 1"
.250	3"
.134	1"
.375	3 1/2"

ISO 6207 Inconel 625 Pipe Mechanical Properties

Grade	Elongational (% in 50mm) min	Yield Properties 0.2% Proof (MPa) min	Tensile Properties (MPa) min	Hardness
				Rockwell B (HR B) max	Brinell (HB) max
625	42.5	Psi – 75,000 , MPa – 517	Psi – 1,35,000 , MPa -930	–	–

Get Schedule 10 to SCH 40 AMS 5581 Tubing and ISO 6207 Tube at Lowest Rate in India with MTC, also compare our prices with any other Stockholder and Distributor of Inconel 625 Tubes in Mumbai

Alloy 625 Seamless Pipe Equivalent

Grade	Euronorm		GOST	UNS No	Japanese JIS	Old British
	No	AFNOR				BS	En
Inconel 625	2.4856	NC22DNB4M	ХН75МБТЮ	N06625	NCF 625	NA 21	NiCr22Mo9Nb

ASTM B444 Gr.625 Pipe Wall Thickness

NOMINAL	O.D. INCHES	80	40	40S & STD	10S	10	80S & E.H.	160
1/8	.405	.095	.068	.068	.049	.049	.095
1/4	.540	.119	.088	.088	.065	.065	.119
3/8	.675	.126	.091	.091	.065	.065	.126
1/2	.840	.147	.109	.109	.083	.083	.147	.187
3/4	1.050	.154	.113	.113	.083	.083	.154	.218
1	1.315	.179	.133	.133	.109	.109	.179	.250
1 1/4	1.660	.191	.140	.140	.109	.109	.191	.250
1 1/2	1.900	.200	.145	.145	.109	.109	.200	.281
2	2.375	.218	.154	.154	.109	.109	.218	.343
2 1/2	2.875	.276	.203	.203	.120	.120	.276	.375
3	3.500	.300	.216	.216	.120	.120	.300	.437
3 1/2	4.000	.318	.226	.226	.120	.120	.318
4	4.500	.337	.237	.237	.120	.120	.337	.531
4 1/2	5.000			.247			.355
5	5.563	.375	.258	.258	.134	.134	.375	.625
6	6.625	.432	.280	.280	.134	.134	.432	.718
7	7.625			.301			.500
8	8.625	.500	.322	.322	.148	.148	.500	.906
9	9.625			.342			.500
10	10.750	.593	.365	.365	.165	.165	.500	1.125
11	11.750			.375			.500
12	12.750	.687	.406	.375	.180	.180	.500	1.312
14	14.000	.750	.437	.375	.188	.250	.500	1.406
16	16.000	.843	.500	.375	.188	.250	.500	1.593
18	18.000	.937	.562	.375	.188	.250	.500	1.781

ASME SB 517 Welded Inconel 625 Pipe Inventory

Inconel 625 Pipes	ASME Sb 444 UNS N06625
AMS 5581 Alloy 625 Tube	Inconel 625 Welded Pipes
Inconel 625 Exhaust Tubing	ASTM B444 Inconel 625 Seamless Pipes
ASTM B444 UNS N06625 Gr.1 Pipes	inconel 625 stainless steel pipes
Inconel 625 Tube	Nickel Alloy N06625 Welded Pipes
UNS N06625 Welded Pipes	Inconel WERKSTOFF NR. 2.4856 Pipes
DIN 2.4856 Erw Pipes	ASTM B444 inconel 625 clad pipes
Inconel 625 Seamless Pipes	alloy 625 seamless pipes
Nickel Alloy 625 Hollow Pipes	Inconel 625 Hollow Pipes
Inconel 625 Seamless Tubing	Inconel DIN NR. 2.4856 Pipes
Alloy 625 Clad Pipes	alloy 625 welded pipes
Inconel Alloy 625 Round Pipes	625 Inconel Seamless Pipes
ASTM B444 UNS N06625 Tube	WERKSTOFF NR. 2.4856 Pipes
Inconel 625 Clad Pipes	ASTM B444 Gr.625 Pipes
ISO 6207 Inconel 625 Pipes	Inconel 625 Hexagonal Pipes
ASTM B444 Inconel 625 Round Pipes	ASTM B444 uns n06625 Seamless Pipes
ASTM B444 UNS N06625 Gr 1 Pipes	625 Inconel ERW Pipes
Material 2.4856 Alloy 625 Pipes	ASME SB 517 welded Inconel 625 Pipes

Material 2.4856 Pipe Testing

• PMI Testing
• Micro and MacroTest
• Chemical Analysis – Spectro Analysis
• Hardness Test
• Flaring Test
• Intergranular Corrosion Test
• Pitting Resistance Test
• Flattening Test
• Mechanical Testing