
Incoloy 800 is a super austenitic grade of steel. Incoloy 800 Sheet is designed with a superior chemical composition of nickel and chromium. The outstanding content gives them enhanced corrosion and oxidation resistance properties. The Alloy 800 Sheet is produced in thickness of less than 6mm but higher than 0.5mm. These sheets can withstand extreme temperatures for a longer time span. Incoloy 800 Plate has enhanced strength and showcases good tolerance against reducing acids in different environmental conditions. The Inconel 800 Plate is produced in thickness over 6mm and can extend up to 100mm or more. The versatile grades of the Alloy 800 Plate have a density of 7.94 gm/cm3 and exhibit outstanding mechanical properties in the system. The Incoloy 800 Alloy Strip has a minimum yield strength of 275mpa with a minimum tensile strength of 600mpa. They can be easily elongated by 45% and still possess good workability. Din 1.4876 Strips are important fixtures that can be used in welding different components in the industry. The non-pressurized grade of Astm B409 Uns N08800 Coil is an efficient module to transport a range of metal from one place to the other efficiently. These coils can be later sheared in different strips, sheets, and plates.
The AMS 5877 Incoloy 800H Plate is a modification of the 800 grade. Here the plate has a higher carbon content between 0.5 to 0.10% than the original grade. ASTM B409 Incoloy 800H Plate is designed with the best raw materials and technology under the guidance of our renowned workers. Alloy 800H Chequered Plate is an aesthetically appealing grade that is stamped or punched with special designs. The plate has anti-skid properties and requires a low level of maintenance. The Incoloy 800HT Plate is nearly identical to the 800H grade but has additions of 1.20 percent of titanium and aluminum embedded in them. Alloy 800HT Sheet can work well in high temperatures and can be used to portray an aesthetical outlook on the grade. The Nickel Alloy 800H Hot Rolled Plate is processed at high temperatures in mills where it reaches its recrystallization limit to precisely shape the grade. NCF 800HT Cold Rolled Sheet is processed at room temperature giving it enhanced strength and corrosion resistance properties. For any questions or queries, contact us for more information.
Specifications | ASME SA168 / ASTM A168 |
---|---|
Finish | Cold rolled sheet (CR), Hot rolled plate (HR), 2B, BA NO(8), 2D, SATIN (Met with Plastic Coated) |
Standard | ASME, API and ASTM |
Different Form of Incoloy 800 Plate supplier | Flats, Rolling Sheet, Sheet, Shim Sheet, Checker Plate, annealed, Rolls, descaled, Plate, soft annealed, Plain Sheet, Blank (Circle), Rolling Plate, sheared, Coils, Foils, Flat Shim, Strip, Flat Sheet, tread plate, Clad Plate |
Thickness | 4.0mm upto 100mm |
Hardness | Hard, Soft, Half Hard, Spring Hard, Quarter Hard |
Specialize | Perforated Sheet, Shim Sheet, B. Q. Profile. |
Grade | Incoloy 800 (UNS N08800) |
Products | Thickness | Width | Length | Price |
---|---|---|---|---|
INCOLOY 800H PLATE TO SB 409 UNS NO. 8810, NACE MR-0175 AVAILABLE SIZE - SIZE :2000 MM x 4100 MM x 12 MM THK | 1/40 in | 6 in | 12 in | $5.02 / each |
NICKEL ALLOY PLATE 3MM X 4FT. X 8FT. INCOLOY 800H | 1/40 in | 12 in | 12 in | $10.05 / each |
INCOLOY 800HT MATERIALS : 4.8MM X 35 X 560MM PLATE INCOLOY 800HT | 1/40 in | 36 in | 36 in | $66.88 / each |
ALLOY STEEL PLATE : GRADE : INCOLOY 800HSIZE : 300 MM W X 400 MM L X 14 MM THICK | 4/125 in | 6 in | 36 in | $20.36 / each |
INCOLOY 800H PLATE AS PER ASTM B409 UNS N08810 SIZE: 4 FEET X 8 FEET X 2 MM THICK | 4/125 in | 24 in | 24 in | $42.16 / each |
Incoloy 800 Plate Imperial Dimensions
Plate Surface finish | Width (max in) | Gauge (in) |
---|---|---|
BA Mexinox only | 48 | 18–28 |
2B – Cold rolled, heat treated, pickled, skin passed Plate | 72* | 10–24 |
Polished plate (not brushed) | 60 | 11–24 |
2D – Cold rolled, heat treated, pickled plate | 60 | 12–24 |
Temper rolled plate Mexinox only | 48 | 13–29 |
Alloy 800 Coil Metric Dimensions
Plate Surface finish | Thickness (mm) | Width (max mm) |
---|---|---|
2R – Cold rolled, bright annealed plate | 0.25–3.5 | 1524 |
2B – Cold rolled, heat treated, pickled, skin passed plate | 0.25–8.0 | 2032 |
2E – Cold rolled, heat treated, mechanically descaled plate | 0.4–8.0 | 2032 |
2D – Cold rolled, heat treated, pickled plate | 0.4–6.35 | 1524 |
2H – Work hardened plate | 0.4–6.35 | 1524 |
Polished, brushed plate | 0.5–4.0 | 1524 |
Grade | Fe | C | Ni | Mn | Cr | Si | Al | S | Ti | Cu |
---|---|---|---|---|---|---|---|---|---|---|
800 | 39.50 min | 0.10 max | 30.00 – 35.00 | 1.50 max | 19.00 – 23.00 | 1.00 max | 0.15 – 0.60 | 0.015 max | 0.15 – 0.60 | 0.75 max |
800H | 39.50 min | 0.05 – 0.10 | 30.00 – 35.00 | 1.50 max | 19.00 – 23.00 | 1.00 max | 0.15 – 0.60 | 0.015 max | 0.15 – 0.60 | 0.75 max |
800HT | 39.50 min | 0.06 – 0.10 | 30.00 – 35.00 | 1.50 max | 19.00 – 23.00 | 1.00 max | 0.15 – 0.60ᴬ | 0.015 max | 0.15 – 0.60ᴬ | 0.75 max |
Element | Yield Properties (0.2 % Offset) | Density | Elongational | Melting Point | Tensile Properties |
---|---|---|---|---|---|
800 / 800H / 800HT | Psi – 30,000 , MPa – 205 | 7.94 g/cm3 | 30 % | 1385 °C (2525 °F) | Psi – 75,000 , MPa – 520 |
STANDARD | BS | WERKSTOFF NR. | AFNOR | UNS | EN | JIS | OR | GOST |
---|---|---|---|---|---|---|---|---|
Incoloy 800 | NA 15 | 1.4876 | Z8NC32-21 | N08800 | X10NiCrAlTi32-20 | NCF 800 | XH32T | ЭИ670 |
Incoloy 800H | NA 15(H) | 1.4958 / 1.4876 | Z8NC33-21 | N08810 | X5NiCrAlTi31-20 | NCF 800H | XH32T | ЭИ670 |
Incoloy 800HT | NA 15(HT) | 1.4859 / 1.4876 | – | N08811 | X8NiCrAlTi32-21 | NCF 800HT | XH32T | ЭИ670 |
Plate Weight per Unit Area | Thickness | Density |
---|---|---|
0.06000 lbs/in²42.184176 kg/m² | 3/16 inches | 0.315 lbs/in³8.72 g/cm³ |
0.08 lbs/in²56.245568 kg/m² | 1/4 inches | 0.315 lbs/in³8.72 g/cm³ |
0.121 lbs/in²85.0714216 kg/m² | 3/8 inches | 0.315 lbs/in³8.72 g/cm³ |
0.161 lbs/in²113.1942056 kg/m² | 1/2 inches | 0.315 lbs/in³8.72 g/cm³ |
0.196 lbs/in²137.8016416 kg/m² | 5/8 inches | 0.315 lbs/in³8.72 g/cm³ |
0.235 lbs/in²165.221356 kg/m² | 3/4 inches | 0.315 lbs/in³8.72 g/cm³ |
0.274 lbs/in²192.6410704 kg/m² | 7/8 inches | 0.315 lbs/in³8.72 g/cm³ |
0.313 lbs/in²220.0607848 kg/m² | 1 inches | 0.315 lbs/in³8.72 g/cm³ |
0.391 lbs/in²274.9002136 kg/m² | 1 1/4 inches | 0.315 lbs/in³8.72 g/cm³ |
0.47 lbs/in²330.442712 kg/m² | 1 1/2 inches | 0.315 lbs/in³8.72 g/cm³ |
0.549 lbs/in²385.9852104 kg/m² | 1 3/4 inches | 0.315 lbs/in³8.72 g/cm³ |
0.627 lbs/in²440.8246392 kg/m² | 2 inches | 0.315 lbs/in³8.72 g/cm³ |
0.705 lbs/in²495.664068 kg/m² | 2 1/4 inches | 0.315 lbs/in³8.72 g/cm³ |
0.784 lbs/in²551.2065664 kg/m² | 2 1/2 inches | 0.315 lbs/in³8.72 g/cm³ |
0.862 lbs/in²606.0459952 kg/m² | 2 3/4 inches | 0.315 lbs/in³8.72 g/cm³ |
0.941 lbs/in²661.5884936 kg/m² | 3 inches | 0.315 lbs/in³8.72 g/cm³ |
Incoloy 800 Sheet | 800 Din 1.4876 Coil |
Astm B409 Uns N08800 Coil | Incoloy N08800 Shim Sheet |
Din 1.4876 Strips | Nickel Alloy 800 Hot Rolled Plate |
Alloy 800 Sheet | Alloy 800 Incoloy Shim Stock |
Incoloy 800 Alloy Foil | SB 409 Alloy 800H 2D Plate |
Nickel Alloy 800 Shim Sheet | Incoloy Alloy 800 Plate |
Incoloy 800 Plate | Alloy 800 Inconel Foil |
Incoloy 800 Perforated Sheet | Incoloy 800 Alloy Strip |
Uns N08800 Inconel 800 Chequered Plate | N08800 Alloy 800 Cold Rolled Plate |
Incoloy 800 Heating Element | Incoloy Alloy 800 Sheet Coil |
Astm B409 Alloy 800 Hot Rolled Plate | UNS N08800 Strip |
1.4876 Cold Rolled Plate | DIN 1.4876 Cold Rolled Plate |
Asme Sb409 Uns N08800 Mesh Plate | AMS 5871 Polished Plate |
Sb 409 Alloy 800 Clad Plates | Nickel Incoloy 800 Sheet |
Inconel 800 Sheet | Incoloy 800H Coil |
Alloy 800 Coil | UNS N08800 Shim Stock |
Inconel 800 Plate | Incoloy 800HT Foil |
ASTM B409 Incoloy 800H Plate | UNS N08811 Shim Stock |
Incoloy 800HT Plate | Inconel alloy 800H Sheet |
© Copyright @ Neelcon Steel All Rights Reserved. | Design & SEO by Mesotek