EN 10225 S355G10+M steel is suitable to use in general structural purposes in oil and offshore platform project. Neelcon Steel is stockist & suppliers of oil and offshore platform steel plate S355G10+M range shall be thickness from 6-300mm,width from 1500-4000mm and length from 5000-16000mm. We provide these S355g10+M Steel Plate cut to size or welding pieces as per client requirement. Buy S355g10+M Z35 Steel Plate material at very low cost from India. Check S355g10 Material Properties before you order.
Steel grade S355g10+N is mainly used in oil and offshore platform steel plate with improved toughness. The minimum yield strength is above 355 Mpa and tensile strength is within 470-630 Mpa of S355G10+N Structural steel plate. We supply S355G10+N oil and offshore plstform steel plate along with mill issued the original mill test certificate as per EN 10204 3.1. We also provide value added services such as shot blasting and painting for these steel plate material S355g10+N. We supply both types of offshore platform steel plate S355G10+N (N= Normalized) and SG355108+M (M= Thermo-Mechanically Rolled). Other then India we also stock various origin S355g10+N Steel Plates such as Austria, Finland, Germany, UK, Japan, Korea and China.
Standard | EN 10225 S355G10+M |
S355g10+N/M Steel Plate Rolling Type | Oil and offshore platform steel plate |
Thickness of S355g10+N/M Steel Plate | 6mm-300mm |
S355g10+N/M Steel Plate Width | 1500mm-4200mm |
Length | 3000mm-18000mm |
Heat Treatment | Normalized / Drawing-back |
Technique | Hot Rolled |
Grade | S355G10+M |
Number | 1.8813 |
Classification | Alloy quality steel |
Density | 7.85 g/cm ³ |
Standard | EN 10225: 2009 Weldable structural steels for fixed offshore structures. Technical delivery conditions |
Technical Requirements & Additional Services:
Equivalent grades of steel S355G10 (1.8813)
EU EN |
Norway NS |
S355G10 | Y20S355M4z Y20S355N4z |
Warning! Only for reference
S355g10+N/M Mechanical Properties
S355g10+M Properties | |||||||
---|---|---|---|---|---|---|---|
Thickness (mm) | |||||||
S355G10+M | ≤ 16 | > 16 ≤ 25 | > 25 ≤ 40 | > 40 ≤ 63 | > 63 ≤ 100 | > 100 | |
Yield strength (≥Mpa) | 355 | 355 | 345 | 335 | 325 | 325 | |
≤ 100 | > 100 | ||||||
Tensile strength (Mpa) | 470-630 | 470-630 |
Chemical composition for S355g10+N/M Steel Plate (Ladle Analysis Max%)
Main chemical elements composition of S355G10+M | ||||||||
---|---|---|---|---|---|---|---|---|
C | Si | Mn | P | S | Cr | Mo | Nb+V | Nb+V+Ti |
0.12 | 0.15-0.55 | 1.65 | 0.015 | 0.005 | 0.20 | 0.08 | 0.06 | 0.08 |
Ni | Alt | Cu | N | Nb | Ti | V | Cr+Mo+Ni+Cu | |
0.70 | 0.015-0.055 | 0.30 | 0.010 | 0.030 | 0.025 | 0.060 | - |
S355G10+M Sizes | Weight in Kg's per each | |||||||
---|---|---|---|---|---|---|---|---|
4.5 | 5.0 | 6.0 | 8.0 | 10 | 12 | 16 | 20 | |
S355G10+M 2000 x 1000 | 70.65 | 78.50 | 94.20 | 125.60 | 157.00 | 188.40 | 251.20 | 314.00 |
S355G10+M 2500 x 1200 | 105.98 | 117.75 | 141.30 | 188.40 | 235.50 | 282.60 | 376.80 | 471.00 |
S355G10+M 3000 x 1500 | 158.96 | 176.63 | 211.95 | 282.60 | 353.25 | 423.90 | 565.20 | 706.50 |
S355G10+M 4000 x 2000 | 282.60 | 314.00 | 376.80 | 502.40 | 628.00 | 753.60 | 1004.80 | 1256.00 |
S355G10+M 8000 x 2000 | 565.20 | 628.00 | 753.60 | 1004.80 | 1256.00 | 1507.20 | 2009.60 | 2512.00 |
S355G10+M 10000 x 2000 | 706.5 | 942.00 | 1246.00 | 1256.00 | 1570.00 | 1884.00 | 2512.00 | |
S355G10+M 10000 x 2400 | 942.00 | 1130.40 | 1507.20 | 1884.00 | 2260.80 | 3014.40 | 3768.00 | |
S355G10+M 13000 x 2400 | 1224.60 | 1469.52 | 1959.36 | 2449.20 | 2939.04 | 3918.72 | 4898.40 | |
S355G10+M 12000 x 3000 | 1695.60 | 2260.80 | 2826.00 | 3391.20 | 4521.60 | 5652.00 |
S355G10+M Plate Sizes | Weight in Kg's per each | |||||||
---|---|---|---|---|---|---|---|---|
25 | 30 | 32 | 35 | 38 | 40 | 45 | 50 | |
S355g10+M+Z 2000 x 1000 | 392.50 | 471.00 | 502.40 | 549.60 | 596.60 | 628.00 | 706.50 | 785.00 |
En 10225 S355g10+M 2500 x 1200 | 588.75 | 706.50 | 753.60 | 824.25 | 894.90 | 942.00 | 1059.75 | 1177.50 |
S355g10+N/G10+M 3000 x 1500 | 883.13 | 1059.75 | 1130.40 | 1236.38 | 1342.35 | 1413.00 | 1589.63 | 1766.25 |
S355g10+N/G10+M 4000 x 2000 | 1570.00 | 1884.00 | 2009.60 | 2198.00 | 2386.40 | 2512.00 | 2826.00 | 3140.00 |
S355g10+N/G10+M 8000 x 2000 | 3140.00 | |||||||
S355g10+N/G10+M 10000 x 2000 | ||||||||
S355g10+N/G10+M 10000 x 2400 | 4710.00 | |||||||
S355g10+N/G10+M 13000 x 2400 | 6123.00 | 5652.00 | 6028.80 | 6594.00 | 7159.20 | 7536.00 | 8478.00 | |
S355g10+N/G10+M 12000 x 3000 | 7347.60 | 7837.44 |
S355G10+M Plate Sizes | Weight in Kg's per each | |||||||
---|---|---|---|---|---|---|---|---|
300WA | 55 | 60 | 65 | 70 | 75 | 80 | 85 | 90 |
S355g10+N/M 2000 x 1000 | 863.50 | 942.00 | 1020.50 | 1099.00 | 1177.50 | 1256.00 | 1334.50 | 1413.00 |
S355g10+N/M 2500 x 1200 | 1295.25 | 1413.00 | 1530.75 | 1648.50 | 1766.25 | 1884.00 | 2001.75 | 2119.50 |
S355g10+N/M 3000 x 1500 | 1942.88 | 2119.50 | ||||||
S355g10+N/M 4000 x 2000 | 3450.00 | 3768.00 | 4082.00 | 4396.00 | 4710.0 | 5024.00 | 5338.00 | 5652.00 |
S355G10+M Plate Sizes | Weight in Kg's per each | |||||||
---|---|---|---|---|---|---|---|---|
300WA | 100 | 110 | 115 | 120 | 125 | 130 | 140 | 150 |
Material S355g10+N 2000 x 1000 | 1570.00 | 1727.00 | ||||||
Material S355g10+N 2500 x 1200 | 2355.00 | 2590.50 | 2708.25 | 2826.00 | 2943.75 | 3061.50 | 3297.00 | 3532.50 |
Material S355g10+N 3000 x 1500 | ||||||||
Material S355g10+N 4000 x 2000 | 6280.00 | 6908.00 |
S355G10+N | S355G10+N Structural Steel Plate |
S355G10+M | S355G10+M Structural Steel Plate |
Steel Plate S355G10+M | S355G10+M oil platform steel plate |
Material S355G10+N Plate | EN10225 Grade S355G10+N Offshore platform Steel plate |
Material S355G10+N Steel Plate | EN10225 S355G10+N oil platform steel plate |
En 10225 S355G10+M | S355G10+M Steel Plate |
En 10225 S355G10+M Steel Plate | S355G10+M Plate |
Mild Steel Plate S355G10+N | S355G10+N Offshore Structural Steel Plates |
S355G10+N Steel | Mild Steel S355G10+N Material Plate |
En 10225 S355G10+N | S355G10+N Steel Plate |
En 10225 S355G10+N Steel Plate | S355G10+N Plate |
BS en10225 S355G10+N Plate | S355G10+N Sheet |
EN10225 Grade S355G10+N Offshore Structural Steel Plate | S355G10+N En10225 Offshore Structural Steel Plate |
Mild Steel Plate S355G10+M | S355G10+M Offshore Structural Steel Plates |
S355G10+M Steel | Mild Steel S355G10+M Material Plate |
EN10225 Grade S355G10+N drilling platform Steel plate | EN10225 Grade S355G10+N Welding Structural Steel Plate |
Steel Plate S355G10+N | S355G10+N oil platform steel plate |
BS en10225 S355G10+M Plate | S355G10+M Sheet |
Material S355G10+M Plate | EN10225 Grade S355G10+M Offshore platform Steel plate |
Material S355G10+M Steel Plate | EN10225 S355G10+M oil platform steel plate |
EN10225 Grade S355G10+M drilling platform Steel plate | EN10225 Grade S355G10+M Welding Structural Steel Plate |
EN10225 Grade S355G10+M Offshore Structural Steel Plate | S355G10+M En10225 Offshore Structural Steel Plate |
Group | EN 10225:2009 | BS 7191:1989 | |
S355G2+N | 1 | S355G2+N | 355D |
S355G3+N | 1 | S355G3+N | 355E |
S355G5+M | 1 | S355G5+M | 355D |
S355G6+M | 1 | S355G6+M | 355E |
S355G7+N | 2 | S355G7+N | 355EM |
S355G7+M | 2 | S355G7+M | 355EM |
S355G8+N | 3 | S355G8+N | 355EMZ |
S355G8+M | 3 | S355G8+M | 355EMZ |
S355G9+N | 2 | S355G9+N | |
S355G9+M | 2 | S355G9+M | |
S355G10+N | 3 | S355G10+N | |
S355G10+M | 3 | S355G10+M | |
S420G1+M | |||
S420G2+M |
Grade | Minimum thickness (mm) | Maximum thickness (mm) |
S355G2+N | 5 | 20 |
S355G3+N | 40 | |
S355G5+M | 20 | |
S355G6+M | 40 | |
S355G7+N | 80 | |
S355G7+M | 50 | |
S355G8+N | 80 | |
S355G8+M | 50 | |
S355G9+N | 80 | |
S355G9+M | 50 | |
S355G10+N | 80 | |
S355G10+M | 50 | |
S420G1+M | 30 | |
S420G2+M |
Tolerances: in accordance with EN 10029
S355G2+N | Cast | 0.43 | - |
S355G3+N | Cast | 0.43 | - |
S355G5+M | Cast | 0.43 | - |
S355G6+M | Cast | 0.43 | - |
S355G7+N | Product | 0.43 | 0.24 |
S355G7+M | Product | 0.43 | 0.24 |
S355G8+N | Product | 0.43 | 0.24 |
S355G8+M | Product | 0.43 | 0.24 |
S355G9+N | Product | (0.43) | 0.22 |
S355G9+M | Product | (0.41) | 0.21 |
S355G10+N | Product | (0.43) | 0.22 |
S355G10+M | Product | (0.41) | 0.21 |
() Non guaranteed indicative values | |||
CEV = C+Mn/6+(Cr+Mo+V)/5+(Ni+Cu)/15 | |||
PCM = C+Si/30+(Mn+Cu+Cr)/20+Ni/60+Mo/15+V/10+5*B |
© Copyright @ Neelcon Steel All Rights Reserved. | Design & SEO by Mesotek