astm a554 stainless steel tubing|a554 polished tube|a554 square|a554 seamless tubes

Astm A554 Stainless Steel Tubing, A554 Polished Tube, A554 Seamless Tubes

Astm A554 Stainless Steel Tubing Supplier in Mumbai, India

Neelcon Steel is one of the leading manufacturersSupplier and exporters of High Quality ASTM A554 Steel TubingASTM A554 Stainless Steel Pipes, We have a large inventory ASTM A554 Stainless Steel Seamless Tubing, Welded Tubing ManufacturerSupplier in India - 304, 304L, 316L, 321H in stock, Get Special Price on ASTM A554 Stainless Steel Tubing

Types of ASTM A554 Stainless Steel Seamless Pipes and Tubes

Stainless Steel Astm A554 Rectangular Tube
Stainless Steel Astm A554 Square Tube
Stainless Steel Astm A554 Round Tube
Stainless Steel Astm A554 Welded Tube
Stainless Steel Astm A554 Polished Pipe

a554 tube supplier, astm a554 tube, astm a554 tube dimensions, a554 square tube, a554 stainless steel tube

We are successfully ranked amongst the top manufacturer, exporter & suppliers of high quality a554 tube, astm a554 tube supplier, astm a554 tube dimensions, a554 square tube, a554 stainless steel tube Suppliers / Exporters / Stockist / Manufacturers Mumbai India

The tubes are made from flat-rolled steel by an automatic welding process, without any filler metal addition. Heat analysis is performed so that several grades of steel conform to the required chemical composition.

A554 can be supplied with the weld bead left on, but in recent years Australasian manufacturers of As Welded tube have all made internal weld bead rolling a fairly routine procedure; this therefore complies with the "Bead Removed" option of A554. (Weld bead rolling is not generally possible in sizes below 31.8mm, although sizes down to 25.4 or even smaller can be hammer swaged if specifically ordered).

ASTM A554 in its usual supply condition is intended for mechanical applications, not for pressure containment and not for sanitary use. A554 includes the possibility of non-destructive testing as a supplementary requirement, but this is not usual for A554 tube.

A554 requires only "free of scale" and implies a "direct off mill" finish as standard. Clause 11.2 does allow - "If special finishes are required, they shall be stated in the order". Thus a large proportion of A554 tube used in the Australian market is supplied in the externally polished or buffed conditions, in the range of about 180 - 320#, or with a very highly polished Surface, typically stated as 600#.

A554 is normally supplied “as welded”, ie. no heat treatment after tube forming (although the tube will be produced from strip which has itself been annealed just prior to the final cold roll). There is the possibility of calling for A554 tube in the annealed condition, but this is never done - annealed tube (“As Welded Annealed” or AWA) is more usually specified to ASTM A269.

Neelcon Steel offer a wide selection of Astm A554 Stainless Steel Tubing in welded and seamless. Neelcon Steel Wholesale Various High Quality Astm A554 Stainless Steel Tubing in all shapes and sizes and with any specifications that the clients, More then 1500 Clients in India, United States, Canada, United Kingdom, United Arab Emirates, Iran, Singapore, Saudi Arabia, South Korea, Indonesia, Malaysia, Italy, Thailand, Germany, Australia, Mexico, Taiwan, Turkey, Pakistan, Spain, France, Brazil, Vietnam, Netherlands, Japan, Philippines, Kuwait, Poland, Qatar, Oman, Egypt, Colombia, Argentina, Nigeria, Finland, Ireland, South Africa, Russia, Bangladesh, Israel, Hong Kong, Chile, Algeria, Romania

ASTM A554 Stainless Steel Tubing Manufacturer in India, Best Price of SS 304l Stainless Steel Tubing, Ss316l Tubing Supplier, Stainless Steel Welded Tubing Manufactured As Per Astm A554 Specifications – SS 304, SS 304l, SS 316l, Ss 321h, Astm A554 304l Tubing, Astm A554 316l Tubing, Seamless Stainless Steel Tubing Supplier, Exporter In India

Astm A554 Stainless Steel Tubing Specification

Astm A554 Specifications / Astm A554 material properties

The ASTM A554 specification covers welded stainless steel tubing for mechanical applications. ASTM A554 is useful in the following conditions:

  • where appearance is a consideration
  • where certain mechanical properties are required
  • when corrosion resistance is necessary.

ASTM A554 tubes are available in the following shapes:

  • round tube
  • square tube
  • rectangular tube
  • special tube
Specifications : ASTM A 312 / A 213 / A 249 / A 269 / A 268 / A 358
Grades : 304 , 316 , 309S , 310 , 310S & 308
Diameter : 1/4” NB to 24” NB & 1/4” OD to 6” OD
Thickness : SCH 5, SCH 10, SCH 40, SCH 80, SCH 160, SCH XXS & 10 SWG, 12 SWG, 14 SWG , 16 SWG, 18 SWG, 19 SWG, 20 SWG, 22 SWG
Length : Standard 6 Meter & Cut to Length Size
Value Added Services : Customize Length, Bending, Annealing, Pickling, Polishing.
ASTM A554 Stainless Steel Square Tubes Specification
STANDARD(GRADE) : ASTM A554(MT304/304L, MT316/316L), (YC1)
O.D. : 12.7x12.7~100x100mm
W.T. : 0.6~6.0mm
WELDING METHOD : TIG or TIG + Plasma or Laser
Other Materials Testing : NACE MR0175, H2 SERVICE, OXYGEN SERVICE, CRYO SERVICE, etc.

Astm A554 Stainless Steel Tubing Inventory

Stainless Steel A554 Tube Grades

  • A554 304 Tube
  • A554 304L Tube
  • A554 304H Tube
  • A554 316 Tube
  • A554 316L Tube
  • A554 316H Tube
  • A554 317L Tube
  • A554 321 Tube
  • A554 347 Tube
  • A554 410 Tube
  • A554 904L Tube
  • A554 310S Tube
  • A554 310 Tube
  • A554 310H Tube
  • A554 316Ti Tube
  • A554 321H Tube
  • A554 347 Tube
  • A554 347H Tube
  • A554 304 Tubing
  • A554 304L Tubing
  • A554 304H Tubing
  • A554 316 Tubing
  • A554 316L Tubing
  • A554 316H Tubing
  • A554 317L Tubing
  • A554 321 Tubing
  • A554 347 Tubing
  • A554 410 Tubing
  • A554 904L Tubing
  • A554 310S Tubing
  • A554 310 Tubing
  • A554 310H Tubing
  • A554 316Ti Tubing
  • A554 321H Tubing
  • A554 347 Tubing
  • A554 347H Tubing

ASTM A554 Stainless Steel Seamless Pipe / Tube Suppliers

ASTM A554 304 / 304L Polished Square Tubing

ASTM A554 304 / 304L Polished Square Tubing

Ornamental square tubing in a number of standard sizes 304 & 304L Stainless Steel. Standard finishes include 180 Grit (#4 polish) with availability of 240 Grit, 320 Grit. Larger square ornamental tubing can be produced to meet the requirements of larger stainless fabrications thru 12" square with wall thicknesses in excess of ½”.

ASTM A554 304 / 304L Polished Square Tubing Supplier

Size Range: ½" to 8" Diameter

Wall thickness: 0.049"- 0.375

Polishes: 180,240, and 320 Grit

All Material Produced to ASTM A-554 Specification (Latest Revision) 

Square Stainless Steel Tubing - Sizes & Weights per foot
304 / 304L Polished Square Tubing
                 
Gauge    18 16 14 11 7  1/4  3/8
Inches   0.049 0.065 0.083 0.120 0.180 0.250 0.375
                 
1/2   0.30 0.39          
5/8   0.38 0.40          
3/4   0.50 65.00 0.81 1.13      
1   0.63 0.83 1.03 1.45 2.17    
1-1/4   0.82 1.08 1.37 1.93 2.99    
1-1/2   0.97 1.27 1.61 2.26 3.63 4.41  
1-3/4   1.13 1.49 1.88 2.66 3.75    
2   1.30 1.69 2.14 3.06 4.46 6.01  
2-1/2       2.72 3.88 5.68 7.67  
3       3.29 4.97 6.90 9.35  
3-1/2         5.67 8.06 10.89  
4         6.26 9.27 12.68 18.52
5         8.02 11.90 16.35 23.53
6         9.46 14.07 18.77 28.53
8             26.03 38.55
                 
All material offer as mill finish, polished 180 grit or polished 320 grit
All material produced to ASTM A554 specification (Latest Revision)

ASTM A554 304 / 304L Square Tubing

ASTM A554 304 / 304L Square Tubing

Ornamental square tubing in a number of standard sizes in 304 & 304L stainless steel. Larger square ornamental tubing can be produced to meet your requirements. We offer 304 square steel pipes in a variety of sizes and thicknesses. 

ASTM A554 304 / 304L Square Tubing Supplier

Size Range: ½" to 8" Diameter

Wall Thickness: 0.049"to 0.375 Wall thickness

All Material Produced to ASTM A-554 Specification (Latest Revision)

Square Stainless Steel Tubing - Sizes & Weights per foot
304/304L Square Tubing
                 
Gauge    18 16 14 11 7  1/4  3/8
Inches   0.049 0.065 0.083 0.120 0.180 0.250 0.375
                 
1/2   0.30 0.39          
5/8   0.38 0.40          
3/4   0.50 65.00 0.81 1.13      
1   0.63 0.83 1.03 1.45 2.17    
1-1/4   0.82 1.08 1.37 1.93 2.99    
1-1/2   0.97 1.27 1.61 2.26 3.63 4.41  
1-3/4   1.13 1.49 1.88 2.66 3.75    
2   1.30 1.69 2.14 3.06 4.46 6.01  
2-1/2       2.72 3.88 5.68 7.67  
3       3.29 4.97 6.90 9.35  
3-1/2         5.67 8.06 10.89  
4         6.26 9.27 12.68 18.52
5         8.02 11.90 16.35 23.53
6         9.46 14.07 18.77 28.53
8             26.03 38.55
                 
All material offer as mill finish, polished 180 grit or polished 320 grit
All material produced to ASTM A554 specification (Latest Revision)

 

ASTM A554 316 / 316L Square Tubing

ASTM A554 316 / 316L Square Tubing

Ornamental square tubing in a number of standard sizes in 316 & 316L stainless steel. Larger square ornamental tubing can be produced to meet your requirements.

ASTM A554 316 / 316L Square Tubing Supplier

Size Range: ½" to 8" Diameter

Wall Thickness: 0.049"to 0.375 Wall thickness

All Material Produced to ASTM A-554 Specification (Latest Revision)

Square Stainless Steel Tubing - Sizes & Weights per foot
316/316L Square Tubing
                 
Gauge    18 16 14 11 7  1/4  3/8
Inches   0.049 0.065 0.083 0.120 0.180 0.250 0.375
                 
1/2   0.30 0.39          
5/8   0.38 0.40          
3/4   0.50 65.00 0.81 1.13      
1   0.63 0.83 1.03 1.45 2.17    
1-1/4   0.82 1.08 1.37 1.93 2.99    
1-1/2   0.97 1.27 1.61 2.26 3.63 4.41  
1-3/4   1.13 1.49 1.88 2.66 3.75    
2   1.30 1.69 2.14 3.06 4.46 6.01  
2-1/2       2.72 3.88 5.68 7.67  
3       3.29 4.97 6.90 9.35  
3-1/2         5.67 8.06 10.89  
4         6.26 9.27 12.68 18.52
5         8.02 11.90 16.35 23.53
6         9.46 14.07 18.77 28.53
8             26.03 38.55
                 
All material offer as mill finish, polished 180 grit or polished 320 grit
All material produced to ASTM A554 specification (Latest Revision)

ASTM A554 Stainless Steel Square Tube Dimensions
ASTM A554 Stainless Steel Square Tube Dimensions
Tube Thickness (mm)
Outside Diameter
(in)
Outside Diameter
(mm)
0.6 0.7 0.8 0.9 1.0 1.2-1.25 1.5 1.6-1.65 2.0-2.11 2.5 3.0-3.05 4.00 5.00 6.00
1/2"x 1/2" 12.7x 12.7
- 15.0x 15.0
- 18.0x 18.0
3/4''x 3/4' 19.0x 19.0
- 20.0x 20.0
- 25.0x 25.0
1"x 1" 25.4x 25.4
- 30.0x 30.0
1 1/4"x 1 1/4" 31.8x 31.8
1 1/2"x 1 1/2" 38.1x 38.1
- 40.0x 40.0
- 50.0x 50.0
2"x 2" 50.8x 50.8
- 60.0x 60.0
- 70.0x 70.0
- 75.0x 75.0
- 80.0x 80.0
- 90.0x 90.0
- 100x 100
Remark (1)Marking:Product SPEC.
(2)Finish : ( ☆: Polish#180#320) ; (△ : Polish #180#320#400)

 

Astm A554 Stainless Steel Tubing Application

Stainless Steel Seamless Pipes Application :

  • Chemical Industries
  • Petrochemical Industries
  • Refineries Plants
  • Fertilizers
  • Heat Exchangers
  • Condensers
  • General Piping
  • Pressure Vessels
  • Paper & Pulp Industries
  • Cement Industries
  • Pharmaceuticals
  • Dairy Industries
  • Food & Beverages
  • Pumps
  • Hydraulic Tubing
  • Architectural Furniture
  • Process Equipments
  • Oil & Gas Industries
  • Textile Industries
  • Engineering
  • Sugar Industries
  • Industrial Equipments
  • Machineries
  • Heat Exchangers
  • Instrumentations
  • Evaporators, Condensers
  • Automobiles
  • Construction
ASTM Specification & Tolerance For Tubing & Piping

ASTM Specification & Tolerance For Tubing & Piping

Specification Allowable Outside Diameter Variation in mm Allowable Wall Thickness Variation Exact Length Tolerance in mm Testing
Nominal Diameter Over Under %Over %Under Over Under
ASTM-A213 Seamless Boiler Superheater and  Heat Exchanger Tubes Under 25.4 .1016 .1016 +20 -0 3.175 0 Flattening Test
25.4-38.1 incl .1524 .1524 +22 -0 3.175 0 Tension Test
38.1-50.8 excl .2032 .2032 +22 -0 3.176 0 Flare Test
50.8-63.5 excl .254 .254 +2 -0 4.46 0 Hardness Test
63.5-76.2 excl .3048 .3048 +22 -0 4.76 0 100% Hydrostatic test
76.2-101.6 incl .381 .381 +22 -0 4.76 0 Refer to ASTM A-450
ASTM-A249 Welded Boiler Superheater, Heat Exchanger And Condenser Tubes Under 25.4 .1016 .1016 +10 -10 3.175 0 Tension Test
25.4-38.1 incl .1524 .1524 +10 -10 3.175 0 Flattening Test
38.1-50.8 Excl .2032 .2032 +10 -10 3.175 0 Flange Test
50.0-63.5 excl .254 .254 +10 -10 4.762 0 Reverse Bend Test
63.5-76.2 excl .3848 .3848 +10 -10 4.762 0 Hardness Test
76.2-101.6 incl .381 .381 +10 -10 4.762 0 100% Hydrostastic Test Refer to ASTM A-450
Minimum Wall tubes +18% 0 available On request
ASTM-A269 Seamless & Welded Tubing for General Service Untp12.7 .13 .13 +15 -15 3.2 0 Flare Test (Seamless Only)
12.7-38.1 exc! .13 .13 +10 -10 3.2 0 Flange Test (Welded Only)
38.1-88.9 excl .25 .25 +10 -10 4.8 0 Hardness Test
88.9-139.7 excl .38 .38 +10 -10 4.8 0 Reverse Flattening Test
139.7-203.2 excl .76 .76 +10 -10 4.8 0 (Welded only) 
100% Hydrostatic Test Refer to ASTM-A269
ASTM-A270 Seamless & Welded Sanitary Tubing 25.4 .05 .20 +10.0 -10.0 3.2 0 Reverse flattening Test
38.1 .05 .20 +10.0 -10.0 3.2 0 100% Hydrostastic Test
50.8 .05 .28 +10.0 -10.0 3.2 0 External' polish on all tubes
60.5 .05 .28 +10.0 -10.0 3.2 0 Refer to ASTM A-270
76.2 .08 .30 +10.0 -10.0 3.2 0
101.6 .08 .38 +10.0 -10.0 3.2 0
ASTM-A312 Seemless & Welded pipe 3.175-38.1 incl .4 .79 Minimum Wall 12.5% under nominal wall Specified 6.4 0 0 Tension Test
38.1-1016 incl .79 .79 6.4 0 0 Flattening Test
101.6-203.2 imcl 1.59 .79 6.4 0 0 100% Hydrostatic Test
(Normally Random Lengths ordered Refer to ASTM A-530
ASTM A-358 Welded pipe 219.08-750mm or 0.01 inch +0.5% -0.3 6.0 Refer to ASTM A-530
Astm A554 Stainless Steel Tubing Chemical Composition / Mechanical Properties / Physical Properties

ASTM A554 Chemical Composition

Specifications Of ASTM A554 Grade Tp316

ASTM

A312, A376,A358, A269, A249, A403, A182, A351

ASME

SA312, SA376, Pressure SA358,SA269, SA249,SA403, SA182, SA351

Chemical Composition as per ASTM A554 Stainless Steel Tubes

Material

ASTM A554  Chemical Composition % Max

C

Mn

P

S

Si

Cr

Ni

Mo

NB

Nb

Ti

TP304

0.08

2.00

0.045

0.030

0.75

18.0-20.0

8.0-11.0

TP304H

0.04-0.10

2.00

0.040

0.030

0.75

18.0-20.0

8.0-11.0

TP304L

0.035

2.00

0.040

0.030

0.75

18.0-20.0

8.0-13.0

TP310S

0.08

2.00

0.045

0.030

0.75

24.0-26.0

19.0-22.0

0.75

TP310HCbN

0.04-0.10

2.00

0.030

0.030

0.75

24.0-26.0

17.0-23.0

0.15-0.35

0.20-0.60

TP316

0.08

2.00

0.040

0.030

0.75

16.0-18.0

11.0-14.0

2.00-3.00

TP316L

0.035

2.00

0.040

0.030

1.00

16.0-18.0

10.0-15.0

2.00-3.00

TP316H

0.04-0.10

2.00

0.040

0.030

0.75

16.0-18.0

11.0-14.0

2.00-3.00

TP321

0.08

2.00

0.040

0.030

0.75

17.0-20.0

9.0-13.0

5C-0.60

TP321H

0.04-0.10

2.00

0.040

0.030

0.75

17.0-20.0

9.0-13.0

4C-0.60

TP347

0.08

2.00

0.040

0.030

0.75

17.0-19.0

9.0-13.0

10xC-1.00

TP347H

0.04-0.10

2.00

0.040

0.030

0.75

17.0-20.0

9.0-13.0

8xC-1.00

Mechanical Properties as per ASTM A554 Stainless Steel Tubes

ASTM A554 Mechanical Properties

Material

Heat Treatment

Temperure F (C) Min.

ASTM grain size NO.

Tensile Strength Ksi (MPa), Min.

Yield Strength Ksi (MPa), Min.

Elongation %, Min

Hardness

Brinell

Rockwell

TP304

Solution

1900 (1040)

75(515)

30(205)

35

192HBW/200HV

90HRB

TP304L

Solution

1900 (1040)

70(485)

25(170)

35

192HBW/200HV

90HRB

TP304H

Solution

1900 (1040)

7

75(515)

30(205)

35

192HBW/200HV

90HRB

TP310S

Solution

1900 (1040)

75(515)

30(205)

35

192HBW/200HV

90HRB

TP310HCbN

Solution

2000 (1110)

7

95(655)

43(295)

30

256HBW

100HRB

TP316

Solution

1900 (1040)

75(515)

30(205)

35

192HBW/200HV

90HRB

TP316L

Solution

1900 (1040)

70(485)

25(170)

35

192HBW/200HV

90HRB

TP316H

Solution

1900 (1040)

7

75(515)

30(205)

35

192HBW/200HV

90HRB

TP321

Solution

1900 (1040)

7

75(515)

30(205)

35

192HBW/200HV

90HRB

TP321H

Solution

2000(1100)

7

75(515)

30(205)

35

192HBW/200HV

90HRB

TP347

Solution

1900(1040)

75(515)

30(205)

35

192HBW/200HV

90HRB

TP347H

Solution

2000(1100)

7

75(515)

30(205)

35

192HBW/200HV

90HRB

Projects Reference list
YEAR PROJECT – FIELD OF MEMBERSHIP PROJECT – LOCATION
2014 REFINERY FINLAND
2014 CONSTRUCTION HONG KONG
2014 REFINERY QATAR
2014 REFINERY FINLAND
2014 REFINERY VENEZUELA
2014 POWER PLANT SINGAPORE
2014 REFINERY SWEDEN
2014 PETRO-CHEMICAL PLANT NETHERLANDS
2014 REFINERY MALAYSIA
Pipes Tubes Inventory
Tubing available sizes
We Export

Canada, Argentina, India, Indonesia, Iran, Italy, Japan, Kazakhstan, Kuwait, Malaysia, Oman, Qatar, Saudi Arabia, Singapore, South Africa, South Korea, Sri Lanka, UAE, UK, USA, India, United States, Canada, United Kingdom, United Arab Emirates, Iran, Singapore, Saudi Arabia, South Korea, Indonesia, Malaysia, Italy, Thailand, Germany, Australia, Mexico, Taiwan, Turkey, Pakistan, Spain, France, Brazil, Vietnam, Netherlands, Japan, Philippines, Kuwait, Poland, Qatar, Oman, Egypt, Colombia, Argentina, Nigeria, Finland, Ireland, South Africa, Russia, Bangladesh, Israel, Hong Kong, Chile, Algeria, Romania, Belgium, Sweden, Peru, Norway, Switzerland, Czechia, New Zealand, China, Portugal, Croatia, Venezuela, Greece, Bahrain, Jordan, Serbia, Tunisia, Paraguay, Austria, Ukraine, Iraq, Denmark, Kenya, Hungary, Estonia, Morocco, Kazakhstan, Bulgaria, Sri Lanka, Slovenia, Ecuador, Azerbaijan, Uzbekistan, Slovakia, Costa Rica, Myanmar (Burma), Bolivia, Lithuania, Bosnia & Herzegovina, Cyprus, Ghana, Macedonia, Turkmenistan, Mauritius, Tanzania, Belarus, Togo, Libya, Zambia, Mongolia, Trinidad & Tobago, Namibia, Yemen, El Salvador, Puerto Rico, Panama, Gujarat, Korba, Bhiwandi, Vijayawada, Ahmedabad, Vadodara, kolkata, Raipur, delhi, maharashtra, surat, jaipur, Rajasthan, Chandigarh, Coimbatore, Cochin, Indore, Karnataka, Ludhiana, Orissa, Vapi, Ankleshwar, Baroda, Nagpur, Aurangabad, Thane, Navi Mumbai, Andheri, Gurgaon, Bhilai, Chhattisgarh, Firozabad, Panipat, Haryana, Tamil Nadu, Jharkhand, Bokaro Steel City, Durgapur, Kharagpur, Haldia, Thiruvananthapuram, Kochi, Assam, Salem, Kanpur, Rourkela, Andhra Pradesh, Bhopal, Rajkot, Uttarakhand, Lucknow, Rudrapur, Patna, Gandhinagar, Jamnagar, Vadodara, Bharuch, Kerala, Faridabad, Nashik, Guwahati

People Also Search : astm a554 radiusastm a554 square tubingastm a554astm a554 en 10219-2astm a554 pdfastm a554 + en10219-2astm a554 grade mt 304astm a554 downloadastm a554 type 304astm a554 tolerancesastm a554 mt304astm a554 round tubeastm a554 vs a269yc astm a554 mt 304 wldastm a554 equivalentastm a554 grade mt 316lastm a554-13norma astm a554astm a554 specificationastm a554 propertiesastm a554 de acero inoxidableastm a554 pressure ratingnorma astm a554 - aisi 304/304lnorma astm a240 a554astm a554 chemical compositionastm a554 sizesastm a554 specastm a554 yield strengthastm a554 mechanical propertiesastm a554 type 316astm a554 t304astm a554 tubeastm a554 tube dimensionsastm a554 tp304tubos astm a554astm a554 201 wldyc astm a554astm a554 pipeastm a554-10 pdfastm a554-03astm a554-08aastm a554-14astm a554-11astm a554-10astm a554 + en 10219-2astm a554 201astm a554 304astm a554 316astm a554-98astm a554 dimensionsastm a554-13 pdfastm a554 specification pdf

Give us a call today to get all the information, +91-9819591024, If you're looking to buy or sell Stainless Steel Pipe/Tube, we can help., call to our Distributor in India or mail us to info@neelconsteel.com for instant free quote of Stainless Steel Pipe/Tube.

Please feel free to give your inquiry in the form below. we will reply you soon

Astm A554 Stainless Steel Tubing Suppliers, Astm A554 Seamless Pipe, Astm A554 Tube,Astm A554 Welded Pipe,Astm A554 Welded Tube,Astm A554 Seamless Pipe (Seamless / Welded and Erw Pipes) Suppliers

sch 5, sch 10S , sch 20 , sch 30 , sch 40S , sch 60 , sch 80S, sch 100, sch 120 Seamless Pipe Stockist & Distributors
Neelcon Steel Wholesale Various High Quality astm a554 stainless steel tubing, a554 tubing, astm a554 tubing, astm a554 square tubing, a554 tube supplier, astm a554 tube, astm a554 tube dimensions, a554 square tube, a554 stainless steel tube in all shapes and sizes and with any specifications that the clients, More then 1500 Worldwide.
Pipe Line Supplier
Oil Gas Tube Manufacturers
Oil Gas Tube Manufacturers
heat exchanger Tube Manufacturers
Oil Gas Tube Manufacturers