AR 400 Plate Suppliers in India
Manufacturers of AR 400LT Plates, AR 400 wear plates stockist in India.
Supplier of AR 400 Plate exporter in India, AR 400LT plates traders, AR400 abrasion resistant steel plate at best price in Mumbai, India
We at Neelcon Steel company is producing Xar 400 Wear Plates in Mumbai. we have our ware house in Thane district and factory in Gujarat. We also have our distributor in China and we can supply Bis 400 Wear Resistant Plates, sheet and coil in 8-10 days to China at best price. If you are looking to buy Rockstar 400 Boiler Steel Plates at best price in India, check our price of Bis 400 Wear Resistant Steel Plates including 400 Bhn Abrasion Resistant Steel Plates, High Tensile Raex 400 Steel Plates and Boiler Steel 400 Bhn Plates. We send 3-4 containers every month to China which makes us a leading AR 400 Boiler Steel Plates, AR 400 Plate Suppliers in India, China.
We have wide size range in AR 400 Hb Clad Steel Plate includes Rolling AR 400 Wear Plate Material in our ready stock at Mumbai, Ahmedabad and johor bahru (Malaysia). We can supply AR 400 Steel Plate at best price as we are one of the largest supplier & trader of Steel AR 400 Plate in India. We maintain wide stock of 400 Hb Wear Resistant Steel Plate. Our dealer near you will contact you and will provide full information about High Wear Resistant Steel 400 Plate. We can also provide free sample of High Quality High Wear Resistant 400 Hb Clad Plate, With the help of our stock of High Wear Resistant Material 400 Hb Plate and Wear Resistant Steel 400 Hb Clad Plate in johor bahru Neelcon Steel company can provide fastest and cost effective deilvery of Abrasion Resistant Steel AR 400 Plate and coil in Malaysia, Indonesia, China, Brunei, Thailand, Vietnam and Singapore.
AR 400 Plate suppliers
AR400 abrasion resistant steel plate
AR 400 Plate
Neelcon Steel company is PED approved manufacturer of AR 400 Sheets in India. We produce low cost AR 400 Plates and sheet but use raw material from reputed manufacturer of High Toughness AR 400 Coils, AR 400 Sheets in Japan, South Korea and Italy. We are producing AR 400 Plate, Ar 400 Wear Resistant Steel Plate, Ar400 Clad Plate & AR 400 Abrasion Resistance Clad Plate at low cost due to reasonable man hours in India and good source of high quality Wear Resistant AR 400 Boiler Steel Plates at best price available in Mumbai, India. As we are supplying AR 400 Wear Clad Steel Plate and AR 400 Wear Plate in Singapore since 2008 to many petrochemical companies and in energy sector industries in Singapore, over a period we have become a preferred AR 400 Wear Plate, AR 400 Plate Suppliers in Indias, singapore, china.
Neelcon Steel is manufacturer of Material AR 400 Wear Resistant Steel Plate and Dillidur 400 Wear Plate Material in Mumbai and Gujarat since year 2004, with the experience of 15 years as a manufacturer of AR 400 Material Wear Resistant Plate we have gained vast experience in worldwide export specially in Abu Dhabhi, Malaysia, Indonesia and many more countries. The advantage to buy material directly from manufacturer is to get the genuine material, Proper test report and save cost atleast 10-15%, aslo manufacturer is always stand behind the product. Neelcon Steel is not only the normal manufacturer, we are the PED approved AR 400 Plate Suppliers in India. our produced plate and sheet are installed in world class pipeline.
- Sumihard 400 Pressure Vessel Steel Plates
- Ramor 400 Pressure Vessel Steel Plates
- Xar 400 Wear Plates
- Bis 400 Wear Resistant Plates
- Rockstar 400 Boiler Steel Plates
- Bis 400 Wear Resistant Steel Plates
- AR 400 Plate Stock
- AR400 wear plate Properties
- AR 400 Plate equivalent
- AR400 plate weight
- AR 400 Plate Price in India
- Steel Plate Weight Calculator
What is AR 400 Plate?
AR 400 Plate also known as AR 400 Plate and AR 400 Plate. The AR400 plate Brinell Hardness Number (BHN) is 360-440 BHN Typically which indicates the material’s level of hardness. AR400 abrasion resistant steel plate (AR) is made from high-carbon alloy steel plate material. AR 400 material is very harder due to the addition of carbon, and formable and weather resistant due to added alloys. AR 400 material have a typical hardness of 400 BHN. AR 400 Plates are the mainly used of the wear resistant grades.
AR & Sumihard are common brand name. Earlier it was known as Sumihard 400 Plate which is now replaced by AR 400 Plate brand name. AR 400 Plate can be welded, formed and cut to size as per you requirement in our inhouse workshop located in Mumbai, India. AR 400 Plate is suitable to use in situations where abrasions and wear and tear are the main causes of failure.
Looking to buy AR 400 Plate suppliers in India? Contact Neelcon Steel for best price of AR400 abrasion resistant steel plate, A reliable AR 400 plates suppliers in India.
AR400 abrasion resistant steel plate Specification
AR 400 Plate Production : Hot-Rolled (HR) / Cold-Rolled (CR)
Heat Treatment : N, Q+T
Material Grade: 400hb wear plate, AR 400, AR 400 Steel Plate, AR 400 Abrasion Resistant Steel Plates, AR 400 Wear Resistant Plates
| AR 400 Plate Thickness (H) | 6mm to 100mm |
|---|---|
| AR 400 wear plate Width (B) | 1,500mm to 2,500mm |
| 400hb wear plate Length (L) | 6,000mm to 12,000mm |
| Heat Treatment | Normalized / Drawing-back |
| Surface Paint | EP, PE, HDP, SMP, PVDF |
| AR 400 Wear Resistant Steel Plate Technique | Hot Rolled |
| Finish | Cold rolled sheet (CR), Hot rolled plate (HR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated) |
Types of Xar 400 Wear Plates
AR 400 Wear Resistance Plates
AR 400 Abrasion Resistant Plates
AR 400 Hardness Plate
AR 400 High Tensile Plate
400 Bhn Sheets
Ar400 Coils
Ar400 Sheets
Ar400 Plates
AR 400 Coils
Abrasion Resistant Creusabro 400 Steel Plates
Sumihard 400 Pressure Vessel Steel Plates
Ramor 400 Pressure Vessel Steel Plates
Xar 400 Wear Plates
Bis 400 Wear Resistant Plates
Rockstar 400 Boiler Steel Plates
Bis 400 Wear Resistant Steel Plates
Makes of AR 400 Plate Hardness Plate Country Origin
| Brand | Manufacture/ Co | Country | Hardness Range |
| Value for AR 400 | |||
| AR 400 | NSSMC | Japan | 360-440 |
AR 400 Plate Stock
The actual hardness ranges for this steel relating to particular thicknesses are provided below:
| Plate Grade | Product | Thickness (mm) | AR400 Hardness Range (HBW) |
| AR 400/ AR400 Plate | Cut Lengths | 2.5 - 6.4 | 360 - 420 |
| AR 400/ AR400 Plate | Heavy Plates | 5 - 15 | 360 - 420 |
| AR 400/ AR400 Plate | Heavy Plates | 15- 30 | 360 - 450 |
| AR 400/ AR400 Plate | Heavy Plates | 30 - 60 | 360 - 480 |
Stocking distributor of AR 400 / 400HB/ 450HB/ 500HB Plate in India
HB 400 / AR 400 /Ar400 Steel Plate Stock Sizes
| GRADE | GAUGE (INCHES) | WIDTH (INCHES) | LENGTH (INCHES) |
|---|---|---|---|
| HB 400 / AR 400 | 0.3750 | 60/96/120 | 480 |
| AR 400 Wear Clad Steel Plate | 0.5000 | 60/96/120 | 480 |
| AR 400 Wear Plate | 0.6250 | 60/96/120 | 480 |
| AR 400 Wear Plate | 0.7500 | 60/96/120 | 480 |
| Material AR 400 Wear Resistant Steel Plate | 0.8750 | 60/96/120 | 480 |
| Dillidur 400 Wear Plate Material | 1.0000 | 60/96/120 | 480 |
| AR 400 Material Wear Resistant Plate | 1.1250 | 60/96/120 | 480 |
| AR 400 Hb Clad Steel Plate | 1.2500 | 60/96/120 | 480 |
| Rolling AR 400 Wear Plate Material | 1.5000 | 60/96/120 | 480 |
| AR 400 Steel Plate | 1.7500 | 60/96/120 | 480 |
| Steel AR 400 Plate | 2.0000 | 60/96/120 | 480 |
| 400 Hb Wear Resistant Steel Plate | 2.2500 | 60/96/120 | 480 |
| High Wear Resistant Steel 400 Plate | 2.5000 | 60/96/120 | 480 |
| High Wear Resistant 400 Hb Clad Plate | 2.7500 | 60/96/120 | 480 |
| High Wear Resistant Material 400 Hb Plate | 3.0000 | 60/96/120 | 480 |
| Wear Resistant Steel 400 Hb Clad Plate | 3.5000 | 60/96/120 | 480 |
| Abrasion Resistant Steel AR 400 Plate | 4.0000 | 60/96/120 | 480 |
Buy from AR 400 Plate suppliers in Mumbai, A govt. recognised AR 400 Plate stockist in Mumbai
AR400 wear plate Properties
Chemical Properties of AR 400HB Wear Resistant Steel Plates
|
AR 400 Plate |
C |
Si |
Mn |
P |
S |
Cr |
Ni |
Mo |
B |
CEV |
CET |
|
thickness mm |
max % |
max % |
max % |
max % |
max % |
max % |
max % |
max % |
max % |
typv |
typv |
|
3-（8） |
0.15 |
0.7 |
1.6 |
0.025 |
0.01 |
0.3 |
0.25 |
0.25 |
0.004 |
0.33 |
0.23 |
|
8-20 |
0.15 |
0.7 |
1.6 |
0.025 |
0.01 |
0.5 |
0.25 |
0.25 |
0.004 |
0.37 |
0.27 |
|
（20）-32 |
0.18 |
0.7 |
1.6 |
0.025 |
0.01 |
1 |
0.25 |
0.25 |
0.004 |
0.48 |
0.29 |
|
（32）-45 |
0.22 |
0.7 |
1.6 |
0.025 |
0.01 |
1.4 |
0.5 |
0.6 |
0.004 |
0.57 |
0.31 |
|
（45）-51 |
0.22 |
0.7 |
1.6 |
0.025 |
0.01 |
1.4 |
0.5 |
0.6 |
0.004 |
0.57 |
0.38 |
|
（51）-80 |
0.27 |
0.7 |
1.6 |
0.025 |
0.01 |
1.4 |
1 |
0.6 |
0.004 |
0.65 |
0.41 |
|
（80）-130 |
0.32 |
0.7 |
1.6 |
0.025 |
0.01 |
1.4 |
1.5 |
0.6 |
0.004 |
0.73 |
0.48 |
AR 400 Plate thickness below 4 mm only after special agreement
- CEV = C+Mn/6+(Cr+Mo+V)/5+(Cu+Ni)/15
- CET = C + (Mn+Mo) /10+( Cr+ Cu)/20+ Ni/40
Mechanical Properties of 400HB Wear Resistant Steel Plates
|
AR Plate Grade |
Mechanical Property |
Charpy V Impact Test |
|||
|---|---|---|---|---|---|
|
AR 400 Plate |
Yield |
Tensile |
Elongation |
Degree |
longitudinal |
|
Min Mpa |
Mpa |
Min % |
-40 |
J |
|
|
1000 |
1250 |
10 |
45 |
||
Differences between Chemical composition & Mechanical properties of AR 400 Plate with other AR Plate
|
Chemical Composition (%)(max) |
|||||||||
|---|---|---|---|---|---|---|---|---|---|
| AR Grade | C | Si | Mn | P | S | Cr | Ni | Mo | B |
| AR 400 Plate | 0.32 | 0.70 | 1.60 | 0.025 | 0.010 | 1.40 | 1.50 | 0.60 | 0.004 |
| AR 450 Plate | 0.23 | 0.50 | 1.60 | 0.025 | 0.010 | 1.20 | 0.25 | 0.25 | 0.005 |
| AR 500 Plate | 0.27 | 0.50 | 1.60 | 0.025 | 0.010 | 1.20 | 0.25 | 0.25 | 0.005 |
| AR 550 Plate | 0.37 | 0.50 | 1.30 | 0.020 | 0.010 | 1.4 | 1.40 | 0.60 | 0.004 |
| AR 600 Plate | 0.47 | 0.70 | 1.4 | 0.015 | 0.010 | 1.20 | 2.50 | 0.70 | 0.005 |
|
Mechanical property |
||||
|---|---|---|---|---|
| AR Grade | Yield strength (Mpa) | Elongation (%)(min) | Hardness (HB) | AKv (min) |
| AR 400 Plate | 1100 | 12 | 370-430 | 45 |
| AR 450 Plate | 1100-1300 | 10 | 425-475 | 50 |
| AR 500 Plate | 1400 | 470-530 | 37 | |
| AR 550 Plate | 525-575 | 30 | ||
| AR 600 Plate | 550-640 | |||
Typical Application of AR 400 Plate & 400 hb steel plate
- Heavy wear platforms
- Mining industry machinery
- Earth moving machinery
- Industrial hoppers, funnels and feeders
Typical CEV values at 25 mm are 0.46 rising to 0.64 at 120 mm
[CEV = C+Mn/6+(Cr+Mo+V)/5+(Ni+Cu)/15]
For 20 mm thick AR 400HB abrasion resistant plate typical values are:
- 400hb wear plate Tensile strength – 1200 MPa (175 ksi)
- Yield point – 800 MPa (116 ksi)
- Elongation – 12 % (lo = 5.65√So)
Application & uses of AR 400 Plates:
- Dump Truck Liners
- Cutting Edges
- Ripper Tyne
- Crusher Liner Plates
- Conveyor Buckets
- Hoppers
- Ore Scrapers
- Drag line Bucket Wear Liners
- Screen Plates - Chute Liners
AR 400 Plate equivalent
We are stocking distributor of AR equivalent plate like AR 400, Swebor 400, Sumihard 400, Quard 400, Raex 400 Plate.
| CHINA GRADE | CHINA STANDARD | EQUAL GRDAE | |
|---|---|---|---|
| JFE | SSAB | ||
| NM300 | GB/T 24186-2009 | EH300 | AR 300 |
| NM360 | GB/T 24186-2009 | EH360 | AR 360 |
| NM400 | GB/T 24186-2009 | EH400 | AR 400 |
| NM450 | GB/T 24186-2009 | EH450 | AR 450 |
| NM500 | GB/T 24186-2009 | EH500 | AR 500 |
| NM550 | GB/T 24186-2009 | EH550 | AR 550 |
| NM600 | GB/T 24186-2009 | EH600 | AR 600 |
AR400 plate weight
| Thickness | Size | Lbs./Sq.Ft |
|---|---|---|
| 3/16" | 96" x 240" | 7.660 |
| 1/4" | 96" x 240" | 10.210 |
| 5/16" | 96" x 240" | 12.760 |
| 3/8" | 96" x 240" | 15.310 |
| 1/2" | 96" x 240" | 20.420 |
| 5/8" | 96" x 240" | 25.520 |
| 3/4" | 96" x 288" | 30.630 |
| 1" | 96" x 240" | 40.840 |
AR 400 Plate Price in India
Check AR400 abrasion resistant steel plate Price in India
- AR 400 Wear Resistant Steel Plate price
FOB Price: US$ 550.00- 700.00 / Ton - Top quality 10mm thick AR 400 nm500 steel plate Price in Mumbai, India
FOB Price: US$ 785.00- 1,155.00 / Ton - Price of 40mm 50mm 60mm AR 400 plate
FOB Price: US$ 599.00- 1,699.00 / Ton - WNM360A hb400 domex 400 composite wear resistant AR 400 2mm steel plate
FOB Price: US$ 500.00- 1,000.00 / Ton - 20mm thickness hardness 400~425 AR 400 steel plate
FOB Price: US$ 600.00- 2,000.00 / Ton - 2.0mm 3.0mm 4.0mm 5.0mm 6.0mm AR 400 wear plate for aggressive environments
FOB Price: US$ 650.00- 900.00 / Metric Ton - hot selling AR 400 rusty plate / NM 400 wear resistant plate / AR 400 sheet good price
FOB Price: US$ 726.00- 1,521.00 / Ton - Material AR 400 Wear Steel Plate for Construction
FOB Price: US$ 1,750.00 / Ton - AR 400 wear steel plate
FOB Price: US$ 670.00- 970.00 / Ton
Above is the approx AR400 plate price. Please contact us for Final AR400 wear plate price in India.
Low-Temperature AR 400 Steel Plates Dealer, HB 400 BHN Plate Stockholder, AR 400 Abrasion resistant Plates, 400 HBW plates Distributors, NM400 Wear Resistant Steel Plates Importers
Neelcon Steel Pvt Ltd is a Govt. approved certified Stockist of Ar400 Clad Plate in India, We have our AR 400 Abrasion Resistance Clad Plate distributor and wholesaler in Malaysia, Indonesia, Singapore, United Arab Emirates (UAE) & South Africa. We are well-known as a trusted Manufacturer of Wear Resistant AR 400 Boiler Steel Plates in Mumbai, India
Ready stock of 400HB Wear Resistant Steel Plates
| AR 400 steel plates | Plat AR 400 |
| AR 400 Steel Plate | AR 400 Wear Resistant Steel Plate |
| AR 400 Hot Rolled Plate | AR 400 Container Plate |
| AR400 wear plate | AR 400 Coated Plate |
| AR 400 wear resistant steel plates | AR 400 wear resistant liner plates |
| AR 400 wear resistant plates in sail-hard quality | AR 400 abrasion resistant wear plates |
| AR 400 Wear and abrasion resistant steel | AR 400 Abrasion Resistant Plates |
| AR 400 Wear Plates | AR 400 Wear-resistant plates |
| Abrasion-resistant (AR) AR 400 Plate | AR 400 Plate for structural use |
| Dillidur 400 abrasion resistant plate | AR400 Abrasion Resistant Steel Plate |
| AR 400 Abrasion Resistant 400HB Plate | AR 400 Wear Resistant Plate |
| Wear Resistant Plate AR400 | AR 400 Plate |
| AR400 Steel Plate | 400HB Wear Resistant Plate |
| AR 400 Brinel Plate | EN 10051 AR 400 Plate |
| AR 400 Low Temperature Plate | AR 400 Boiler Plate |
| AR 400 Alloy Plate | AR 400 Heavy Section Plate |
| AR 400 Brinel Plate | EN 10051 AR 400 Plate |
| AR 400 Low Temperature Plate | AR 400 Boiler Plate |
| AR 400 Alloy Plate | AR 400 Pressure Vessels Plate |
| 400 hb steel plates | AR Wear Resistance Plate 400 HB |
| FORA 400 - Hard Wearing Plate | AR 400 Heavy Section Plate |
| AR AR 400 Plate |
AR 400 Pressure Vessels Plate |
| AR 400 material Plate | AR 400 Plate material |
| 400 Hb Plates | AR 400 Plate |
| High Tensile Raex 400 Steel Plates | AR 400 Wear Resistance Plates |
| Boiler Steel 400 Bhn Plates | AR 400 Abrasion Resistant Plates |
| AR 400 Boiler Steel Plates | AR 400 Hardness Plate |
| AR 400 Sheets | AR 400 High Tensile Plate |
| AR 400 Plates | 400 Bhn Sheets |
| AR 400 Coils | Ar400 Coils |
| AR 400 Sheets | Ar400 Sheets |
| AR 400 Plate | Ar400 Plates |
| Ar 400 Wear Resistant Steel Plate | AR 400 Coils |
| Ar400 Clad Plate | Abrasion Resistant Creusabro 400 Steel Plates |
| AR 400 Abrasion Resistance Clad Plate | Sumihard 400 Pressure Vessel Steel Plates |
| Wear Resistant AR 400 Boiler Steel Plates | Ramor 400 Pressure Vessel Steel Plates |
| AR 400 Wear Clad Steel Plate | Xar 400 Wear Plates |
| AR 400 Wear Plate | Bis 400 Wear Resistant Plates |
| AR 400 Wear Plate | Rockstar 400 Boiler Steel Plates |
| Material AR 400 Wear Resistant Steel Plate | Bis 400 Wear Resistant Steel Plates |
| Dillidur 400 Wear Plate Material | AR 400 Plates |
| AR 400 Material Wear Resistant Plate | AR 400 Plate |
| AR 400 Hb Clad Steel Plate | AR 400 Wear Plates |
| Rolling AR 400 Wear Plate Material | AR 400 Abrasion Resistant Steel Plates |
| AR 400 Steel Plate | Hb 400 Bhn Plate |
| Steel AR 400 Plate | AR 400lt Plates |
| 400 Hb Wear Resistant Steel Plate | AR 400 Low-temperature Steel Plates |
| High Wear Resistant Steel 400 Plate | Hb 400 Bhn Plate |
| High Wear Resistant 400 Hb Clad Plate | 400 Hbw AR Plates |
| High Wear Resistant Material 400 Hb Plate | AR 400 Liner Plates |
| Wear Resistant Steel 400 Hb Clad Plate | AR 400 Bhn Plate |
| Abrasion Resistant Steel AR 400 Plate | 400 Bhn Abrasion Resistant Steel Plates |
Stockist & supplier of 400 Hb Steel Plates in India, Buy from AR 400 High Tensile Plate, EN 10051 AR 400 Plate Stockist, AR 400 Steel Plate manufacturers for lowest price in India.
Neelcon Steel PVT LTD is a manufacturer and supplier of 00 Hb Steel Plates offering in all Ratings up to 3000#, built a distribution network with more then 15 countries globally like Malaysia, India, Thailand, Vietnam, Indonesia, Saudi Arabia (KSA), Singapore, Kuwait, Qatar, Philippines, United Arab Emirates (UAE), South Africa, UK, Oman, Bahrain. You can mail for AR 400 Plate suppliers in India to induce live quotes now. Looking to buy AR 400 Steel Plate at the best cost in India.
We have AR400 wear plate Stock in various sizes & dimensions, AR 400 plate, AR 400 Liner Plates Distributors in Mumbai, Contact us for Free quote & sample of AR 400 Plate, AR400 abrasion resistant steel plate near you
We are Manufacturer and Exporter of AR 400 Plate in Mumbai, India. All of our AR400 wear plate, AR400 abrasion resistant steel plateis made and tried to worldwide guidelines, and specifications as per ASME, ANSI & ASTM, etc. We have our Manufacturing Unit and Dealers in Gujarat, Ahmedabad, Pune, Chennai, Indore, Kolkata, Delhi, Nagpur, Bhosari, Bangalore, Punjab, Ludhiana, Gurgaon, Rajkot, Karnataka, Uttar Pradesh, Faridabad, Khopoli, Madhya Pradesh, Jaipur, Ghaziabad, Haryana, Vadodara, West Bengal, Rajasthan, Raipur, Aurangabad, Kolhapur, Chhattisgarh, Tamil Nadu, Karnataka.
© Copyright @ Neelcon Steel All Rights Reserved. | Design & SEO by Mesotek