API 2W Grade 50 Plate
API 2W Grade 50 TMCP Offshore Steel Plates exporter in India.
Stockist of API 2W grade 60 & API 2W Gr 50t Offshore Plate, API 2W Grade 50 Plate suppliers in India, API 2W Gr 50 Plate at best price in Mumbai, India
API 2W Grade 50 Plate suppliers
API 2W Grade 50t
API 2W grade 60 TMCP Offshore Steel Plate
What is API 2W Grade 50 Plate?
API 2W Gr 50 Impact Resistance in HAZ Steel Plates
API 2W Gr50 Intermediate Strength Structural Steel manufactured by Thermo-Mechanical Control Processing TMCP for impact resistance in heat affected zone (HAZ). These API 2W Plate are good to use for welded construction of offshore structures/ offshore platforms. The minimum yield strength of API 2W Gr 50 Plate is 50ksi (345MPa) and a minimum, mid-thickness, transverse Charphy V-notch impact toughness of 41J (30 ft-lbf) at -40ºC (-40ºF). API 2W Grade 50 steel plate Thickness, width, and length tolerances are in accordance with the requirements of ASTM A6. The flatness tolerance for as-supplied product is 1⁄2 ASTM A6. Where a TMCP steel is required these API 2W grade 60 & API 2W Grade 50t can be used for offshore use or for fixed structures.
API Spec 2W Steel Plates for Offshore Structures Produced by Thermo-Mechanical Control Processing (TMCP) – Grade 50 Steel Plate; Grade 60 Steel Plate
API 2W Grade 50 Plate Price in India
Check API 2W Plate Price in India
US$ 580.00-US$ 620.00 / Ton
Above is the approx cost of API 2W Gr 50. Please contact us for Final API 2W Grade 50 Plate price in India.
API 2W Plate Specification
| Thickness (H) | 8-100 mm |
| Width (B) | 2000-3200 mm |
| Length (L) | 6000-12000 mm |
| Heat Treatment | Normalized / Drawing-back |
| Technique | Hot Rolled |
| Hardness | Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc. |
| Form | Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange) |
| Finish | Cold rolled sheet (CR), Hot rolled plate (HR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated) |
| API 2W Offshore Construction Steel Plate |
|
API 2W Grade 50 TMCP Offshore Steel Plate
Nearest Equivalent Grade of API 2W Plate: API 2H, EN10225 S355G7+N, S355G7+M, S355G8+N,S355G8+M, BS7191:1989 355EN, 355EMZ
Benefits to use API 2W Grade 50
- Good impact resistance in heat affected zone (HAZ)
- Structural offshore grade for critical applications
- Lower carbon content for improved weldability
- Thermo-mechanically rolled for extra strength and toughness
- Resistance to lamellar tearing
API 2W Grade 50 TMCP Offshore Steel Plates Stock
Buy from API 2W Grade 50 Plate suppliers in Mumbai, A govt. recognised API 2W Gr 50 Plate stockist in Mumbai
API 2W Grade 50 Steel Plate Stock Sizes
| GRADE | GAUGE (INCHES) | WIDTH (INCHES) | LENGTH (INCHES) |
|---|---|---|---|
| API 2W Grade 50 | 0.3750 | 60/96/120 | 480 |
| API 2W Grade 50 | 0.5000 | 60/96/120 | 480 |
| API 2W Grade 50 | 0.6250 | 60/96/120 | 480 |
| API 2W Grade 50 | 0.7500 | 60/96/120 | 480 |
| API 2W Grade 50 | 0.8750 | 60/96/120 | 480 |
| API 2W Grade 50 | 1.0000 | 60/96/120 | 480 |
| API 2W Grade 50 | 1.1250 | 60/96/120 | 480 |
| API 2W Grade 50 | 1.2500 | 60/96/120 | 480 |
| API 2W Grade 50 | 1.5000 | 60/96/120 | 480 |
| API 2W Grade 50 | 1.7500 | 60/96/120 | 480 |
| API 2W Grade 50 | 2.0000 | 60/96/120 | 480 |
| API 2W Grade 50 | 2.2500 | 60/96/120 | 480 |
| API 2W Grade 50 | 2.5000 | 60/96/120 | 480 |
| API 2W Grade 50 | 2.7500 | 60/96/120 | 480 |
| API 2W Grade 50 | 3.0000 | 60/96/120 | 480 |
| API 2W Grade 50 | 3.5000 | 60/96/120 | 480 |
| API 2W Grade 50 | 4.0000 | 60/96/120 | 480 |
API 2W GRADES AVAILABLE EX-STOCK
| Grade | Grade Available | Max Thickness |
|---|---|---|
| API 2W Grade 50 | API 2W-50 | 100 mm |
| API 2W Grade 60 | S420G2+M or S460G2+M | 100 mm |
Types of API 2W Grade 50 Plate
| API 2W Plate | API 2W Gr 50t |
| API 2W Grade 50 | API 2W Grade 50t |
| API 2W Gr 50 | API 2W Grade 50 Z |
| API 2W Gr 50 Plate | API2w Grade 50 |
| API 2W Grade 50 TMCP Offshore Steel Plates | API 2W gr 60 |
| API 2W grade 60 TMCP Offshore Steel Plate | API 2W grade 60 |
| API 2W Grade 50 Offshore Plate | API 2W Grade 50 Structural Plate |
| API 2W Grade 50 Steel Plate | API 2W Grade 50 Plate |
| API 2W Grade 50 TMCP Structural Steel Plate | API 2W Grade 50 TMCP Offshore Steel Plate |
| API 2W Gr 50 Offshore Steel Plate | API 2W Gr 50 Offshore Construction Plate |
| Marine & Offshore Steel Plate API 2W Gr 50 | API 2W Gr 50 Offshore Construction Steel Plate |
| API 2W Gr 50 Structural Steel Plate | API 2W Gr 50 Offshore Structural Plate |
API 2W Gr 50 Plate Properties
Mechanical Properties of API 2W Plate
Tensile Testing is performed transverse direction according to API 2W requirement. The minimum values are tabulated below :
| Thickness, t mm [in.] |
0.2% YS MPa [ksi] |
UTS MPa [ksi], |
Elongation in 50.8mm[2”], min.% |
Elongation in 200mm [ 8”] |
|---|---|---|---|---|
| t ≤ 25.4 [1.00] | 345-517 [50-75] | 448 [65] | 23 | 18 |
| t > 25.4 [1.00] | 345-483 [50-70] | 448 [65] | 23 | 18 |
API 2W Physical Properties
| Property | API 2W-50 | API 2W-60 | |
|---|---|---|---|
| Yield Strength (MPa) | t ≤ 25 mm | 345 - 517 | 414 - 621 |
| t > 25 mm | 345 - 483 | 414 - 586 | |
| Tensile Strength (MPa) | 448 | 517 | |
| Elongation in 50 mm min % | 23 | 22 | |
| Elongation in 200 mm min % | 18 | 16 |
API 2W specification Carbon Equivalent Values – CEV and Pcm
| Thickness | API 2W 50 | API 2W 60 | |
|---|---|---|---|
| Max Thickness | 150 mm | 100 mm | |
| CEV | ≤40 mm | 0.39 | 0.42 |
| > 40 mm to ≤ 90 mm | 0.41 | ||
| > 40 mm to ≤ 100 mm | 0.45 | ||
| > 90 mm to ≤ 150 mm | 0.43 | ||
| Pcm | ≤40 mm | 0.22 | 0.25 |
| > 40 mm to ≤ 90 mm | 0.23 | ||
| > 40 mm to ≤ 100 mm | |||
| > 90 mm to ≤ 150 mm | 0.24 | 0.45 |
API 2W Grade 50 Charpy V-notch Impact Testing
Specimen Size mm |
Specimen Size in. |
Minimum Average Energy J (ft-lb) |
Minimum Single Value Energy J (ft-lb) |
Test Temperatute ºC (ºF) |
|---|---|---|---|---|
| 10 X 10 | 0.394 x 0.394 | 41(30) | 34(25) | -40(-40) |
| 7.5 X 10 | 0.295 x 0.394 | 41(30) | 34(25) | -40(-40) |
| 5 X 10 | 0.197 x 0.394 | 41(30) | 34(25) | -40(-40) |
| 7.5 X 10 | 0.295 x 0.394 | 31(23) | 26(19) | -46(-50) |
| 5 X 10 | 0.197 x 0.394 | 20(15) | 18(13) | -62(-80) |
API 2W Gr 50 Plate Chemical Composition (Heat Analysis, wt %, max. unless indicated)
| C | Mn | P | S | Si | Al Total |
Cr | Ti | Cb | N2,3 |
B2 |
|---|---|---|---|---|---|---|---|---|---|---|
| 0.16 | 1.15-1.60 | 0.030 | 0.010 | 0.05-0.50 | 0.02-0.06 | 0.25 | 0.007-0.02 | 0.03 | 0.012 | 0.0005 |
Value shall be as agreed upon and stated on the order.
1. Manganese up to 1.65 (heat analysis) is permitted at the option of the material manufacturer
2. Nitrogen and Boron shall not be intentionally added
3. Nitrogen may be 0.013% max., if titanium if 0.010 to 0.012%
API 2W Chemical Composition – Heat Analysis
| Element | API 2W Grade 50 | API 2W Grade 60 |
|---|---|---|
| C | 0.16 | |
| Mn | 1.15 to 1.6 | |
| P | 0.03 | |
| S | 0.010 | |
| Si | 0.05 to 0.50 | |
| Ni | 0.75 | 1.0 |
| Cr | 0.25 | 0.25 |
| Mo | 0.08 | 0.15 |
| Cu | 0.35 | |
| Ti | 0.007 to 0.02 | 0.007 - 0.002 |
| Nb | 0.03 | |
| B | 0.0005 | |
| Al | 0.02 to 0.06 | |
TMCP Structural Steel API 2W Plate
| Thickness, t, mm [in.] | CEⅡw Max | Pcm Max | CEⅡw typical | Pcm Typical |
|---|---|---|---|---|
| ≤ 40 [1.5"] 40 < t ≤ 90 [1.5" < t ≤ 3.5"] |
0.39 | 0.22 | 0.36 | 0.16 |
| 0.41 | 0.23 | na | na |
Weldability of API 2W Grade 50
| Welding Process | Thickness, mm (in.) | Minimum Preheat and Interpass Temperature |
Consumables |
|---|---|---|---|
| Shielded Metal Arc (SMAW) | Up to 38.1 (1.5”) | 10ºC (50ºF) | AWS E7015-X, E7016-X, E7018-X |
| >38.1 (1.5”) to 63.5 (2.5”) | 65ºC (150ºF) | ||
| Gas Metal Arc (GMAW) | Up to 38.1 (1.5”) | 10ºC (50ºF) | AWS ER70S-X |
| >38.1 (1.5”) to 63.5 (2.5”) | 65ºC (150ºF) | ||
| Submerged Arc (SAW) | Up to 38.1 (1.5”) | 10ºC (50ºF) | AWS F7XX-EXXX-XX |
| >38.1 (1.5”) to 63.5 (2.5”) | 65ºC (150ºF) | ||
| Flux Cored Arc (FCAW) | Up to 38.1 (1.5”) | 10ºC (50ºF) | AWS E7XTX-X |
| >38.1 (1.5”) to 63.5 (2.5”) | 65ºC (150ºF) |
Supplementary Requirements for API 2W Gr 50 Plate
By agreement between the purchaser and plate manufacturer, the following Supplementary Requirements may be specified on the purchase order:
- S1 (Ultrasonic Examination),
- S2 (Notch Toughness Test at Lower Temperature),
- S3 (Individual Plate Testing),
- S4 (Through-Thickness [Z- Direction] Testing),
- S5 (Low Sulfur Steel for Improved Through-Thickness Properties),
- S7 (Low Nitrogen Content for Improved Notch Toughness in Strain-Hardened Condition),
- S8 (Strain-Aged Charpy V—Notch Impact Tests),
- S12 (Notch Toughness Using Drop Weight),
- S13 (Surface Quality) and
- S14 (Thickness Tolerance)
Stockist & supplier of API 2W Plate in India, Buy from API 2W Grade 50t TMCP Offshore Steel Plates manufacturers for lowest price in India.
We have API 2W Grade 50 TMCP Offshore Steel Plates Stock in various sizes & dimensions, Contact us for Free quote & sample of API 2W Grade 50 Z & API 2W gr 60 near you.
© Copyright @ Neelcon Steel All Rights Reserved. | Design & SEO by Mesotek