Stainless Steel Tube Tubing Astm A269 ASTM A249, A312,A268,A270,A554

Astm A269 Stainless Steel Tubing Supplier in Mumbai, India

Neelcon Steel is one of the leading manufacturersSupplier and exporters of High Quality ASTM A269 Steel TubingASTM A269 Stainless Steel Pipes, We have a large inventory ASTM A269 Stainless Steel Seamless Tubing, Welded Tubing ManufacturerSupplier in India - 304, 304L, 316L, 321H in stock, Get Special Price on ASTM A269 Stainless Steel Tubing

Neelcon Steel offer a wide selection of Astm A269 Stainless Steel Tubing in welded and seamless. Neelcon Steel Wholesale Various High Quality Astm A269 Stainless Steel Tubing in all shapes and sizes and with any specifications that the clients, More then 1500 Clients in India, United States, Canada, United Kingdom, United Arab Emirates, Iran, Singapore, Saudi Arabia, South Korea, Indonesia, Malaysia, Italy, Thailand, Germany, Australia, Mexico, Taiwan, Turkey, Pakistan, Spain, France, Brazil, Vietnam, Netherlands, Japan, Philippines, Kuwait, Poland, Qatar, Oman, Egypt, Colombia, Argentina, Nigeria, Finland, Ireland, South Africa, Russia, Bangladesh, Israel, Hong Kong, Chile, Algeria, Romania

ASTM A269 Stainless Steel Tubing Manufacturer in India, Best Price of SS 304l Stainless Steel Tubing, Ss316l Tubing Supplier, Stainless Steel Welded Tubing Manufactured As Per Astm A269 Specifications – SS 304, SS 304l, SS 316l, Ss 321h, Astm A269 304l Tubing, Astm A269 316l Tubing, Seamless Stainless Steel Tubing Supplier, Exporter In India

Astm A269 Stainless Steel Tubing Specification

Astm A269 Specifications / Astm a269 material properties

The ASTM A269 specification covers nominal-wall-thickness, seamless and welded austenitic steel tubing for general corrosion-resisting and low- or high-temperature service. Upon completion, all material shall:

  • shall be furnished in the heat-treated condition.
  • conform to the chemical composition requirements.
  • different mechanical test requirements that includes, flaring test, flange test, hardness test, and reverse flattening test are presented.
  • shall be subjected to the non-destructive electric test or the hydrostatic test.

SA 269/ ASTM A269 Seamless and Welded Austenitic Stainless Steel  Pipe Tubing

ASTM A269 Stainless Steel Seamless Tubing, Welded Tubing Manufacturer, Supplier in India - 304, 304L, 316L, 321H

Stainless Steel 304, 304L, UNS S30400, UNS S30403, WNR 1.4301, WNR 1.4307 Pipes, Tubes / Tubing Available for Immediate Supply.

ASTM A269 Stainless Steel Pipes Specification and Inventory:

Type: Seamless and Welded Austenitic Stainless Steel Tubing for General Service

Grades: SS304, SS201, SS304L, SS316L, SS202, SS321H, SS347
Size: 1/8” OD to 6” OD
Length: Up to 6 meters, custom cut lengths
Thickness: 
Finish: 2B MIll Finish , No.4 finish, BA Finish, 400 Grit Finish, 550 Grit Finish, 600 Grit Finish
Delivery Condition: AP (Annealed and Pickled), MP (Mechanical Polish), BA (Bright Annealed), EP (Electro Polished)
Tubing type : ASTM A269 304 Stainless Steel Seamless Tubing, SS304L Seamless Tubes, ASTM A269 Type 316L Tubing, ASTM A269 304L Welded Tubing, ASTM A269 316L Welded Polished Tubes, ASTM A269 304 Stainless Steel Square Tubing
Shapes: Round Pipes, Square Pipes, Rectangular Pipes, Special Shapes Pipes

Material A269 Overview

1.1 This specification covers grades of nominal-wall-thickness, stainless steel tubing for general corrosion-resisting and low- or high-temperature service.
1.2 The tubing sizes and thicknesses usually furnished to this specification are 0.252 in. (6.4 mm) in inside diameter and larger and 0.020 in. (0.51 mm) in nominal wall-thickness and heavier.
1.3 Mechanical property requirements do not apply to tubing smaller than 1/8 in. (3.2 mm) in inside diameter or 0.015 in. (0.38 mm) in thickness.
1.4 Optional supplementary requirements are provided and, when one or more of these are desired, each shall be so stated in the order.
1.5 The values stated in inch-pound units are to be regarded as the standard.

Astm A269 Stainless Steel Tubing Inventory

Other SS Tube grades

  • A269 304 Tubing
  • A269 304L Tubing
  • A269 304H Tubing
  • A269 316 Tubing
  • A269 316L Tubing
  • A269 316H Tubing
  • A269 317L Tubing
  • A269 321 Tubing
  • A269 347 Tubing
  • A269 410 Tubing
  • A269 904L Tubing
  • A269 310S Tubing
  • A269 310 Tubing
  • A269 310H Tubing
  • A269 316Ti Tubing
  • A269 321H Tubing
  • A269 347 Tubing
  • A269 347H Tubing

ASTM A269 Stainless Steel Seamless Pipe / Tube Suppliers

STAINLESS STEEL TUBING SIZES

STAINLESS STEEL TUBING SIZES

Seamless Type 316/316L
ASTM A269 ASTM A213/ASME SA213 
Average Wall

Size 
OD, Inches
BW
Ga
Wall 
Dec-In.
ID
Weight 
Lbs/Ft.
1/4
20
0.035
0.180
0.0804
16
0.065
0.120
0.1284
14
0.083
0.084
0.1480
5/16
20
0.035
0.243
0.1039
3/8
20
0.035
0.305
0.1271
18
0.049
0.277
0.1706
16
0.065
0.245
0.2152
1/2
20
0.035
0.430
0.1738
18
0.049
0.402
0.2360
16
0.065
0.370
0.3020
11
0.120
0.260
0.4870
3/4
11
0.120
0.510
0.8074
7/8
18
0.049
0.777
0.4323
1
11
0.120
0.760
1.1278
1-1/4
11
0.120
1.010
1.4480
ASTM A269 Equivalent

ASTM A269 Equivalent

Grade Specification Comparison of ASTM A269 TP 316 / 316L Stainless Steel Seamless Pipes and Tubes

Table 4. Grade specifications for 316 grade stainless steels.

Grade
UNS
No
Old British
Euronorm
Swedish
SS
Japanese
JIS
BS
En
No
Name
316
S31600
316S31
58H, 58J
1.4401
X5CrNiMo17-12-2
2347
SUS 316
316L
S31603
316S11
-
1.4404
X2CrNiMo17-12-2
2348
SUS 316L
316H
S31609
316S51
-
-
-
-
-

Note: These comparisons are approximate only. The list is intended as a comparison of functionally similar materials not as a schedule of contractual equivalents. If exact equivalents are needed original specifications must be consulted.

Astm A269 Stainless Steel Tubing Application

Stainless Steel Seamless Pipes Application :

  • Chemical Industries
  • Petrochemical Industries
  • Refineries Plants
  • Fertilizers
  • Heat Exchangers
  • Condensers
  • General Piping
  • Pressure Vessels
  • Paper & Pulp Industries
  • Cement Industries
  • Pharmaceuticals
  • Dairy Industries
  • Food & Beverages
  • Pumps
  • Hydraulic Tubing
  • Architectural Furniture
  • Process Equipments
  • Oil & Gas Industries
  • Textile Industries
  • Engineering
  • Sugar Industries
  • Industrial Equipments
  • Machineries
  • Heat Exchangers
  • Instrumentations
  • Evaporators, Condensers
  • Automobiles
  • Construction
ASTM A269 Tolerances


ASTM A269 Tolerances

Specification Tolerances for ASTM A269

Specification Tolerances for ASTM A269

STAINLESS ASTM/ASME SPECIFICATIONS

A269 Welded and Seamless 
General Service

Size 
Inches
Tolerances, Inches
OD, 
Inches
Wall
Ovality
2 x Tol., In.
Cut Length
(b), In.
Less than 1/2
±0.005
±15%
——
+1/8
–0
Over 1/2 to 1-1/2
±0.005
±10%
–0.065
Over 1-1/2 to 3-1/2
±0.010
±10%
–0.095
+3/16
–0
Over 3-1/2 to 5-1/2
±0.015
±10%
–0.150
Over 5-1/2 to 8
±0.030
±10%
——

(b) For cut lengths 24 feet or less. Over 24 feet add 1/8 inch per 10 feet to 1/2 inch maximum tolerance. Tubes not heat-treated to be stencilled: “HT-O”
Tests per ASTM A269 and A450*

  • Flare for seamless tubes
  • Flange for welded tubes
  • Reverse flatten for welded tubes
  • Hardness: Rockwell B90 or BHN 200 maximum
  • Hydrotest: At 1000 to 4500 psi depending on diameter provided stress does not exceed 26,000 or 24,000 psi maximum if ordered per P=2St/D.
  • Alternate: Non-destructive electrical test permitted unless order specifies which test to be used. Test to A450.
  • For details, refer to A450 specification.
Astm A269 Stainless Steel Tubing Chemical Composition / Mechanical Properties / Physical Properties

ASTM A269 Chemical Composition

Specifications Of ASTM A269 Grade Tp316

ASTM

A312, A376,A358, A269, A249, A403, A182, A351

ASME

SA312, SA376, Pressure SA358,SA269, SA249,SA403, SA182, SA351

Chemical Composition as per ASTM A269 Stainless Steel Tubes

Material

ASTM A269 Chemical Composition % Max

C

Mn

P

S

Si

Cr

Ni

Mo

NB

Nb

Ti

TP304

0.08

2.00

0.045

0.030

0.75

18.0-20.0

8.0-11.0

TP304H

0.04-0.10

2.00

0.040

0.030

0.75

18.0-20.0

8.0-11.0

TP304L

0.035

2.00

0.040

0.030

0.75

18.0-20.0

8.0-13.0

TP310S

0.08

2.00

0.045

0.030

0.75

24.0-26.0

19.0-22.0

0.75

TP310HCbN

0.04-0.10

2.00

0.030

0.030

0.75

24.0-26.0

17.0-23.0

0.15-0.35

0.20-0.60

TP316

0.08

2.00

0.040

0.030

0.75

16.0-18.0

11.0-14.0

2.00-3.00

TP316L

0.035

2.00

0.040

0.030

1.00

16.0-18.0

10.0-15.0

2.00-3.00

TP316H

0.04-0.10

2.00

0.040

0.030

0.75

16.0-18.0

11.0-14.0

2.00-3.00

TP321

0.08

2.00

0.040

0.030

0.75

17.0-20.0

9.0-13.0

5C-0.60

TP321H

0.04-0.10

2.00

0.040

0.030

0.75

17.0-20.0

9.0-13.0

4C-0.60

TP347

0.08

2.00

0.040

0.030

0.75

17.0-19.0

9.0-13.0

10xC-1.00

TP347H

0.04-0.10

2.00

0.040

0.030

0.75

17.0-20.0

9.0-13.0

8xC-1.00

Mechanical Properties as per ASTM A269 Stainless Steel Tubes

ASTM A269 Mechanical Properties

Material

Heat Treatment

Temperure F (C) Min.

ASTM grain size NO.

Tensile Strength Ksi (MPa), Min.

Yield Strength Ksi (MPa), Min.

Elongation %, Min

Hardness

Brinell

Rockwell

TP304

Solution

1900 (1040)

75(515)

30(205)

35

192HBW/200HV

90HRB

TP304L

Solution

1900 (1040)

70(485)

25(170)

35

192HBW/200HV

90HRB

TP304H

Solution

1900 (1040)

7

75(515)

30(205)

35

192HBW/200HV

90HRB

TP310S

Solution

1900 (1040)

75(515)

30(205)

35

192HBW/200HV

90HRB

TP310HCbN

Solution

2000 (1110)

7

95(655)

43(295)

30

256HBW

100HRB

TP316

Solution

1900 (1040)

75(515)

30(205)

35

192HBW/200HV

90HRB

TP316L

Solution

1900 (1040)

70(485)

25(170)

35

192HBW/200HV

90HRB

TP316H

Solution

1900 (1040)

7

75(515)

30(205)

35

192HBW/200HV

90HRB

TP321

Solution

1900 (1040)

7

75(515)

30(205)

35

192HBW/200HV

90HRB

TP321H

Solution

2000(1100)

7

75(515)

30(205)

35

192HBW/200HV

90HRB

TP347

Solution

1900(1040)

75(515)

30(205)

35

192HBW/200HV

90HRB

TP347H

Solution

2000(1100)

7

75(515)

30(205)

35

192HBW/200HV

90HRB

ASTM A269 Pressure Rating / ASTM A269 Burst Pressure

ASTM A269 Pressure Rating / ASTM A269 Burst Pressure

OD inches Ave. Wall inches Min Yield Strength (PSI) Min Tensile Strength (PSI) Theoretical Burst Pressure * (PSI) Working Pressure (PSI) 25% of Burst Theoretical Yield Point ** (PSI) Collapse Pressure *** (PSI)
0.250 0.020 30,000 75,000 14,286 3,571 5,714 4,416
0.250 0.028 30,000 75,000 21,649 5,412 8,660 5,967
0.250 0.035 30,000 75,000 29,167 7,292 11,667 7,224
0.250 0.049 30,000 75,000 48,355 12,089 19,342 9,455
0.250 0.065 30,000 75,000 81,250 20,313 32,500 11,544
0.375 0.020 30,000 75,000 8,955 2,239 3,582 3,029
0.375 0.028 30,000 75,000 13,166 3,292 5,266 4,145
0.375 0.035 30,000 75,000 17,213 4,303 6,885 5,077
0.375 0.049 30,000 75,000 26,534 6,634 10,614 6,816
0.375 0.065 30,000 75,000 39,796 9,949 15,918 8,597
0.500 0.020 30,000 75,000 6,522 1,630 2,609 2,304
0.500 0.028 30,000 75,000 9,459 2,365 3,784 3,172
0.500 0.035 30,000 75,000 12,209 3,052 4,884 3,906
0.500 0.049 30,000 75,000 18,284 4,571 7,313 5,304
0.500 0.065 30,000 75,000 26,351 6,588 10,541 6,786
0.500 0.083 30,000 75,000 37,275 9,319 14,910 8,307
0.625 0.020 30,000 75,000 5,128 1,282 2,051 1,859
0.625 0.028 30,000 75,000 7,381 1,845 2,953 2,568
0.625 0.035 30,000 75,000 9,459 2,365 3,784 3,172
0.625 0.049 30,000 75,000 13,947 3,487 5,579 4,335
0.625 0.065 30,000 75,000 19,697 4,924 7,879 5,591
0.625 0.083 30,000 75,000 27,124 6,781 10,850 6,910
0.625 0.095 30,000 75,000 32,759 8,190 13,103 7,734
0.625 0.109 30,000 75,000 40,172 10,043 16,069 8,639
0.750 0.028 30,000 75,000 6,052 1,513 2,421 2,156
0.750 0.035 30,000 75,000 7,721 1,930 3,088 2,669
0.750 0.049 30,000 75,000 11,273 2,818 4,509 3,664
0.750 0.065 30,000 75,000 15,726 3,931 6,290 4,749
0.750 0.083 30,000 75,000 21,318 5,330 8,527 5,905
0.750 0.095 30,000 75,000 25,446 6,362 10,179 6,637
0.750 0.109 30,000 75,000 30,733 7,683 12,293 7,453
0.750 0.120 30,000 75,000 35,294 8,824 14,118 8,064
0.875 0.020 30,000 75,000 3,593 898 1,437 1,340
0.875 0.028 30,000 75,000 5,128 1,282 2,051 1,859
0.875 0.035 30,000 75,000 6,522 1,630 2,609 2,304
0.875 0.049 30,000 75,000 9,459 2,365 3,784 3,172
0.875 0.065 30,000 75,000 13,087 3,272 5,235 4,126
0.875 0.083 30,000 75,000 17,560 4,390 7,024 5,152
0.875 0.095 30,000 75,000 20,803 5,201 8,321 5,807
0.875 0.109 30,000 75,000 24,886 6,221 9,954 6,543
0.875 0.120 30,000 75,000 28,346 7,087 11,339 7,100
1.000 0.028 30,000 75,000 4,449 1,112 1,780 1,633
1.000 0.035 30,000 75,000 5,645 1,411 2,258 2,027
1.000 0.049 30,000 75,000 8,149 2,037 3,259 2,796
1.000 0.065 30,000 75,000 11,207 2,802 4,483 3,647
1.000 0.083 30,000 75,000 14,928 3,732 5,971 4,567
1.000 0.095 30,000 75,000 17,593 4,398 7,037 5,159
1.000 0.109 30,000 75,000 20,908 5,227 8,363 5,827
1.000 0.120 30,000 75,000 23,684 5,921 9,474 6,336
1.000 0.134 30,000 75,000 27,459 6,865 10,984 6,963
1.250 0.035 30,000 75,000 4,449 1,112 1,780 1,633
1.250 0.049 30,000 75,000 6,380 1,595 2,552 2,260
1.250 0.065 30,000 75,000 8,705 2,176 3,482 2,958
1.250 0.083 30,000 75,000 11,485 2,871 4,594 3,719
1.250 0.095 30,000 75,000 13,443 3,361 5,377 4,213
1.250 0.109 30,000 75,000 15,843 3,961 6,337 4,776
1.250 0.120 30,000 75,000 17,822 4,455 7,129 5,207
1.250 0.134 30,000 75,000 20,468 5,117 8,187 5,742
1.500 0.035 30,000 75,000 3,671 918 1,469 1,367
1.500 0.049 30,000 75,000 5,243 1,311 2,097 1,896
1.500 0.065 30,000 75,000 7,117 1,779 2,847 2,487
1.500 0.083 30,000 75,000 9,333 2,333 3,733 3,136
1.500 0.095 30,000 75,000 10,878 2,719 4,351 3,559
1.500 0.109 30,000 75,000 12,754 3,188 5,101 4,043
1.500 0.120 30,000 75,000 14,286 3,571 5,714 4,416
1.500 0.134 30,000 75,000 16,315 4,079 6,526 4,881
1.500 0.148 30,000 75,000 18,439 4,610 7,375 5,336
1.750 0.035 30,000 75,000 3,125 781 1,250 1,176
1.750 0.049 30,000 75,000 3,864 966 1,546 1,434
1.750 0.065 30,000 75,000 6,019 1,505 2,407 2,146
1.750 0.083 30,000 75,000 7,860 1,965 3,144 2,711
1.750 0.095 30,000 75,000 9,135 2,284 3,654 3,080
1.750 0.109 30,000 75,000 10,672 2,668 4,269 3,504
1.750 0.120 30,000 75,000 11,921 2,980 4,768 3,832
1.750 0.134 30,000 75,000 13,563 3,391 5,425 4,242
1.750 0.148 30,000 75,000 15,268 3,817 6,107 4,645
1.750 0.165 30,000 75,000 17,430 4,357 6,972 5,124
2.000 0.035 30,000 75,000 2,720 680 1,088 1,032
2.000 0.049 30,000 75,000 3,864 966 1,546 1,434
2.000 0.065 30,000 75,000 5,214 1,303 2,086 1,887
2.000 0.083 30,000 75,000 6,788 1,697 2,715 2,387
2.000 0.095 30,000 75,000 7,873 1,968 3,149 2,715
2.000 0.109 30,000 75,000 9,175 2,294 3,670 3,092
2.000 0.120 30,000 75,000 10,227 2,557 4,091 3,384
2.000 0.134 30,000 75,000 11,605 2,901 4,642 3,751
2.000 0.148 30,000 75,000 13,028 3,257 5,211 4,111
2.000 0.165 30,000 75,000 14,820 3,705 5,928 4,542
Astm A269 standard

Astm A269 standard

SS 316L ASTM A269 Seamless Pipe packing will be according to international standard in bundles strapped by strips then into containers to avoid any damage.Special Sizes or Non Standard Size ASTM A269 Stainless Steel Seamless and Welded Tubing in Round, Square, Rectangular Form. Buy ASTM A269-10 Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service from Neelcon Steel.

This standard is issued under the fixed designation ASTM A 269; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A superscript epsilon indicates an editorial change since the last revision or reapproval. 

This specification covers grades of nominal-wall thickness, stainless steel tubing for general corrosion-resisting and low-or high-temperature service, as designated in Table 1. 

The tubing sizes and thickness usually furnished to this specification are 1⁄4 in. (6.4 mm) in inside diameter and larger and 0.020 in. (0.51 mm) in nominal wall-thickness and heavier. 

Mechanical properties requirements do not apply to tubing smaller than 1⁄8 in. (3.2 mm) in inside diameter or 0.015 in. (0.38 mm) in thickness. Additional testing requirements may apply for use in ASME B31.3 applications. 

ASTM A 262 Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steel A 370 Test Methods and Definitions for Mechanical Testing of Steel Products A 480/A 480M Specification for General Requirements. 

1 This specification is under the jurisdiction of ASTM Committee A01 on Steel, Stainless Steel and Related Alloys and is the direct responsibility of Subcommittee A01.10 on Stainless and Alloy Steel Tubular Products. Current edition approved March 1, 2004. Published April 2004. Originally approved in 1944. Last previous edition approved in 2002 as A 269 – 02a.
Projects reference list
YEAR PROJECT – FIELD OF MEMBERSHIP PROJECT – LOCATION SUPPLIED MATERIALS
2014 REFINERY FINLAND A269 tubing, Fittings & Flanges
2014 CONSTRUCTION HONG KONG Welded and seamless Stainless Steel pipes and mechanical tubes, A269 304L tubing
2014 REFINERY FINLAND A269 tubing & Fittings
2014 REFINERY FINLAND A269 tubing & Fittings
2014 REFINERY VENEZUELA SMLS AND WELDED CS, LAS, HAS, SS, Pipes, Fittings and Flanges,
2014 POWER PLANT FINLAND SMLS Low Alloy Steel Pipes
2014 REFINERY SWEDEN Stainless Steel Pipes, Fittings & Flanges
2014 PETRO-CHEMICAL PLANT NETHERLANDS Carbon and Stainless Steel Pipes, Fittings & Flanges
2014 REFINERY NETHERLANDS A269 304L tubing, Stainless Steel Pipes, Fittings & Flanges
2014 EXPLORATION AND PRODUCTION NETHERLANDS A269 304L tubing, Stainless Steel Pipes, Fittings & Flanges
2014 REFINERY CONGO A269 304L tubing, SMLS C.S. API 5L Gr.B / X42 / X52
2014 PETRO-CHEMICAL ITALY SMLS C.S. API 5L Gr.B / X42 / X52, A269 304L tubing,
2014 AMMONIA PLANT ROMANIA A269 304L tubing, SMLS C.S. API 5L X52
2013 REFINERY ANTWERP BELGIUM A269 304L tubing,, Fittings, Flanges, Studbolts, Spectacles & Drip Rings acc. EN Standards
2013 REFINERY NETHERLANDS Stainless Steel Pipes, Fittings & Flanges
2013 FPSO BRASIL Inconel / Hastelloy Pipes, A269 304L tubing, Fittings & Flanges
2013 EXPLORATION AND PRODUCTION TURKMENISTAN Inconel / Hastelloy Pipes, A269 304L tubing, Fittings & Flanges
2013 REFINERY FINLAND Low Alloy Steel Pipes and Fittings, A269 304L tubing,
2013 GAS STORAGE IRAQ SMLS AND WELDED C.S. PIPES + HDPE COATED PIPES
2013 REFINERY TURKEY astm a213tp316 welded AISI 201 304 430 A269 304L tubing, A269 tubing, A269 304L tubing,
2013 REFINERY ITALY SMLS Carbon, Low Alloy and Stainless steel pipes
2013 POWER PLANT ITALY WELDED Stainless ASTM A240 – TP410S
2012 SULPHUR STORAGE UNITED ARAB EMIRATES astm a213tp316 welded AISI 201 304 430 A269 304L tubing, A269 tubing/B, A269 304L tubing,
2012 POWER PLANT BAHRAIN SMLS Alloy ASTM A335/ astm a213tp316 welded AISI 201 304 430 A269 304L tubing, A269 tubing/ astm a213tp316 welded AISI 201 304 430 A269 304L tubing, A269 tubing
2012 POWER PLANT IRAQ A269 304L tubing,SMLS C.S. /Alloy/Stainless ASTM A106/333/312- SMLS C.S. API 5L
2012 PLATFORMS ANGOLA A269 304L tubing, SMLS EN 10210 S355J2H/ WELDED EN10219 S355J2H
2012 REFINERY ITALY WELDED C.S. EN10208-2 L415MB
2012 GAS PIPELINES TUNISIE A269 304L tubing, astm a213tp316 welded AISI 201 304 430 A269 304L tubing, A269 tubing
2012 GAS PIPELINES ITALY A269 304L tubing,SMLS C.S. EN10208-2 L360 NB
2012 UREA PLANT SAUDI ARABIA A269 304L tubing,SMLS Stainless ASTM A312
2012 REFINERY SURINAME A269 304L tubing,astm a213tp316 welded AISI 201 304 430 A269 304L tubing, A269 tubing
2012 OFFSHORE PLATFORM OFFSHORE DUTCH NORTH SEA ( Low Temperature ) Stainless Steel Pipes, Fittings & Flanges
2012 REFINERY NETHERLANDS Hastelloy & Stainless Steel Pipes, Fittings & Flanges
2012 REFINERY NETHERLANDS Stainless Steel Pipes, Fittings & Flanges
2012 REFINERY NETHERLANDS Stainless Steel Pipes, Fittings & Flanges
2012 OFFSHORE PLATFORM OFFSHORE UK NORTH SEA A269 304L tubing, High Yield Pipes & Flanges
2012 OFFSHORE PLATFORM MEDITERRENEAN Welded Stainless ASTM A358, A269 304L tubing
2011 ECOFUEL PLANT ITALY SMLS AND WELDED CS +LTCS PIPES, INCL. COATED PIPES, SMLS STAINLESS ASTM A312 PIPES
2011 GAS PIPELINES NIGERIA astm a213tp316 welded AISI 201 304 430 A269 304L tubing, A269 tubing, A269 304L tubing
2011 OIL& GAS PROCESSING AND SEPARATION UNITED ARAB EMIRATES astm a213tp316 welded AISI 201 304 430 A269 304L tubing, A269 tubing /API 5L/B
2011 ENI SLURRY TECHNOLOGY PLANT ITALY astm a213tp316 welded AISI 201 304 430 A269 304L tubing, A269 tubing
2010 ENVIRONMENTAL SAFEGUARD CITY OF VENICE ITALY A269 304L tubing, SMLS Stainless ASTM A312
2010 PETRO-CHEMICAL PLANT RUSSIA SMLS C.S. /Alloy/Stainless ASTM A333/312/WELDED C.S. /Stainless A671-CC60 CL.32/312/A358 CL. 1
2010 AVIO FUEL DISTRIBUTION ITALY astm a213tp316 welded AISI 201 304 430 A269 304L tubing, A269 tubing
2010 GAS STORAGE POLAND astm a213tp316 welded AISI 201 304 430 A269 304L tubing, A269 tubing
2010 POWER PLANT BRASIL SMLS Stainless ASTM A312
2010 POWER PLANT BRASIL SMLS Stainless ASTM A312
2010 POWER PLANT ITALY SMLS C.S. /Alloy/Stainless/ASTM A106/335/312/WELDED C.S. API 5L/B
2009 POWER PLANT CHILE astm a213tp316 welded AISI 201 304 430 A269 304L tubing, A269 tubing
2009 POWER PLANT CHILE A269 304L tubing, astm a213tp316 welded AISI 201 304 430 A269 304L tubing, A269 tubing
2009 METHANOL PLANT TRINIDAD E TOBAGO SMLS C.S. ASTM API 5L/B/WELDED C.S. API 5L/B/Stainless ASTM A312/A358
2009 GAS PIPELINES ITALY SMLS EN 10208-2/L360NB
2009 CHEMICAL PLANT QATAR astm a213tp316 welded AISI 201 304 430 A269 304L tubing, A269 tubing
2009 REFINERY ITALY A269 304L tubing, SMLS C.S. /Alloy/Stainless ASTM A106/335/312
2009 GAS PIPELINES ITALY astm a213tp316 welded AISI 201 304 430 A269 304L tubing, A269 tubing
2009 PLATFORMS CONGO astm a213tp316 welded AISI 201 304 430 A269 304L tubing, A269 tubing
2009 POWER PLANT ENGLAND astm a213tp316 welded AISI 201 304 430 A269 304L tubing, A269 tubing
2008 PETRO-CHEMICAL PLANT RUSSIA SMLS C.S. /Alloy/Stainless ASTM A333/312
2008 PETRO-CHEMICAL PLANT SWEDEN astm a213tp316 welded AISI 201 304 430 A269 304L tubing, A269 tubing
2008 REFINERY POLAND SMLS C.S. /A.S. ASTM A106/333/335
2008 OIL PIPELINES ALGERIA astm a213tp316 welded AISI 201 304 430 A269 304L tubing, A269 tubing
2008 PLATFORMS TUNISIE astm a213tp316 welded AISI 201 304 430 A269 304L tubing, A269 tubing
2008 PLATFORMS GABON astm a213tp316 welded AISI 201 304 430 A269 304L tubing, A269 tubing
2008 REFINERY ITALY astm a213tp316 welded AISI 201 304 430 A269 304L tubing, A269 tubing
2008 GAS PIPELINES ITALY SMLS EN 10208-2/L360NB
2008 AMMONIA PLANT VENEZUELA astm a213tp316 welded AISI 201 304 430 A269 304L tubing, A269 tubing
2008 POWER PLANT ITALY A269 304L tubing, astm a213tp316 welded AISI 201 304 430 A269 304L tubing, A269 tubing
2008 POWER PLANT ITALY A269 304L tubing, SMLS C.S. /Alloy/Stainless/ASTM A106/335/312
2007 AROMATICS PLANT KUWAIT astm a213tp316 welded AISI 201 304 430 A269 304L tubing, A269 tubing
2007 PETRO-CHEMICAL PLANT RUSSIA astm a213tp316 welded AISI 201 304 430 A269 304L tubing, A269 tubing
2007 REFINERY ITALY astm a213tp316 welded AISI 201 304 430 A269 304L tubing, A269 tubing
2007 PETRO-CHEMICAL PLANT RUSSIA astm a213tp316 welded AISI 201 304 430 A269 304L tubing, A269 tubing
2007 PETRO-CHEMICAL PLANT GERMANY A269 304L tubing, astm a213tp316 welded AISI 201 304 430 A269 304L tubing, A269 tubing
2007 AMMONIA PLANT TRINIDAD E TOBAGO A269 304L tubing, astm a213tp316 welded AISI 201 304 430 A269 304L tubing, A269 tubing
2007 PETRO-CHEMICAL PLANT TRINIDAD E TOBAGO A269 304L tubing, astm a213tp316 welded AISI 201 304 430 A269 304L tubing, A269 tubing
2007 PETRO-CHEMICAL PLANT TRINIDAD E TOBAGO A269 304L tubing, astm a213tp316 welded AISI 201 304 430 A269 304L tubing, A269 tubing
2007 UREA PLANT TRINIDAD E TOBAGO astm a213tp316 welded AISI 201 304 430 A269 304L tubing, A269 tubing
2007 REFINERY MOROCCO SMLS Alloy/Stainless ASTM A335/312
2007 UREA-AMMONIA PLANT PAKISTAN astm a213tp316 welded AISI 201 304 430 A269 304L tubing, A269 tubing
2007 METHANOL PLANT EGYPT astm a213tp316 welded AISI 201 304 430 A269 304L tubing, A269 tubing
2007 REFINERY LITHUANIA A269 304L tubing, astm a213tp316 welded AISI 201 304 430 A269 304L tubing, A269 tubing
2006 REFINERY MOROCCO astm a213tp316 welded AISI 201 304 430 A269 304L tubing, A269 tubing
2006 POWER PLANT ITALY astm a213tp316 welded AISI 201 304 430 A269 304L tubing, A269 tubing
2006 POWER PLANT ITALY A269 304L tubing, astm a213tp316 welded AISI 201 304 430 A269 304L tubing, A269 tubing
2006 PETRO-CHEMICAL PLANT QATAR A269 304L tubing, astm a213tp316 welded AISI 201 304 430 A269 304L tubing, A269 tubing
2006 PETRO-CHEMICAL PLANT KSA astm a213tp316 welded AISI 201 304 430 A269 304L tubing, A269 tubing
2006 PETRO-CHEMICAL PLANT KSA A269 304L tubing, astm a213tp316 welded AISI 201 304 430 A269 304L tubing, A269 tubing
2006 PETRO-CHEMICAL PLANT KSA SMLS C.S. /Alloy/ASTM A106/ A333/ A335
2006 POWER PLANT SPAIN A269 304L tubing, Pipes & Fittings
2006 PLATFORMS ITALY A269 304L tubing, astm a213tp316 welded AISI 201 304 430 A269 304L tubing, A269 tubing
2006 REFINERY ITALY SMLS/WELDED C.S. /A269 304L tubing, sus 304 square 2205 stainless steel rectangular tube pipes grade 200
2006 PETRO-CHEMICAL PLANT QATAR A269 304L tubing, astm a213tp316 welded AISI 201 304 430 A269 304L tubing, A269 tubing
Pipes Tubes Inventory
Tubing available sizes

People Also Search ::
We Export

Canada, Argentina, India, Indonesia, Iran, Italy, Japan, Kazakhstan, Kuwait, Malaysia, Oman, Qatar, Saudi Arabia, Singapore, South Africa, South Korea, Sri Lanka, UAE, UK, USA, India, United States, Canada, United Kingdom, United Arab Emirates, Iran, Singapore, Saudi Arabia, South Korea, Indonesia, Malaysia, Italy, Thailand, Germany, Australia, Mexico, Taiwan, Turkey, Pakistan, Spain, France, Brazil, Vietnam, Netherlands, Japan, Philippines, Kuwait, Poland, Qatar, Oman, Egypt, Colombia, Argentina, Nigeria, Finland, Ireland, South Africa, Russia, Bangladesh, Israel, Hong Kong, Chile, Algeria, Romania, Belgium, Sweden, Peru, Norway, Switzerland, Czechia, New Zealand, China, Portugal, Croatia, Venezuela, Greece, Bahrain, Jordan, Serbia, Tunisia, Paraguay, Austria, Ukraine, Iraq, Denmark, Kenya, Hungary, Estonia, Morocco, Kazakhstan, Bulgaria, Sri Lanka, Slovenia, Ecuador, Azerbaijan, Uzbekistan, Slovakia, Costa Rica, Myanmar (Burma), Bolivia, Lithuania, Bosnia & Herzegovina, Cyprus, Ghana, Macedonia, Turkmenistan, Mauritius, Tanzania, Belarus, Togo, Libya, Zambia, Mongolia, Trinidad & Tobago, Namibia, Yemen, El Salvador, Puerto Rico, Panama, Gujarat, Korba, Bhiwandi, Vijayawada, Ahmedabad, Vadodara, kolkata, Raipur, delhi, maharashtra, surat, jaipur, Rajasthan, Chandigarh, Coimbatore, Cochin, Indore, Karnataka, Ludhiana, Orissa, Vapi, Ankleshwar, Baroda, Nagpur, Aurangabad, Thane, Navi Mumbai, Andheri, Gurgaon, Bhilai, Chhattisgarh, Firozabad, Panipat, Haryana, Tamil Nadu, Jharkhand, Bokaro Steel City, Durgapur, Kharagpur, Haldia, Thiruvananthapuram, Kochi, Assam, Salem, Kanpur, Rourkela, Andhra Pradesh, Bhopal, Rajkot, Uttarakhand, Lucknow, Rudrapur, Patna, Gandhinagar, Jamnagar, Vadodara, Bharuch, Kerala, Faridabad, Nashik, Guwahati

Give us a call today to get all the information, +91-9819591024, If you're looking to buy or sell Stainless Steel Pipe/Tube, we can help., call to our Distributor in India or mail us to info@neelconsteel.com for instant free quote of Stainless Steel Pipe/Tube.

Please feel free to give your inquiry in the form below. we will reply you soon

Astm A269 Stainless Steel Tubing Suppliers, A269 Seamless Pipe, A269 Tube,A269 Welded Pipe,A269 Welded Tube,A269 Seamless Pipe Suppliers in India, Usa, Canada, UK, Uae, Iran, Singapore, Ksa, South Korea, Indonesia, Malaysia, Italy, Thailand, Germany, Australia, Mexico, Taiwan, Turkey, Pakistan, Spain, France, Brazil, Vietnam, Netherlands, Japan

sch 5, sch 10S , sch 20 , sch 30 , sch 40S , sch 60 , sch 80S, sch 100, sch 120 Seamless Pipe Stockist & Distributors in Belgium, Sweden, Peru, Norway, Switzerland, Czechia, New Zealand, China, Portugal, Croatia, Venezuela, Greece, Bahrain, Jordan, Serbia, Tunisia, Paraguay, Austria, Ukraine, Iraq, Denmark, Kenya, Hungary, Estonia, Morocco, Kazakhstan, Bulgaria, Sri Lanka, Slovenia, Ecuador, Azerbaijan, Uzbekistan, Slovakia, Costa Rica, Myanmar (Burma), Bolivia, Lithuania, Bosnia & Herzegovina, Cyprus, Ghana, Macedonia, Turkmenistan, Mauritius, Tanzania, Belarus, Togo, Libya, Zambia, Mongolia, Trinidad & Tobago, Namibia, Yemen, El Salvador, Puerto Rico, Panama
Neelcon Steel Wholesale Various High Quality Astm A269 Stainless Steel Tubing in all shapes and sizes and with any specifications that the clients, More then 1500 Clients in India, United States, Canada, United Kingdom, United Arab Emirates, Iran, Singapore, Saudi Arabia, South Korea, Indonesia, Malaysia, Italy, Thailand, Germany, Australia, Mexico, Taiwan, Turkey, Pakistan, Spain, France, Brazil, Vietnam, Netherlands, Japan, Philippines, Kuwait, Poland, Qatar, Oman, Egypt, Colombia, Argentina, Nigeria, Finland, Ireland, South Africa, Russia, Bangladesh, Israel, Hong Kong, Chile, Algeria, Romania
Pipe Line Supplier
Oil Gas Tube Manufacturers
Oil Gas Tube Manufacturers
heat exchanger Tube Manufacturers
Oil Gas Tube Manufacturers